【Mail-bin delivery from Japan】
Product Description:
[For IP Camera] [Waterproof] 12V PoE Splitter
IP type security camera power cable / 2 x set of 2 conversion adapters that can extend LAN cable by "1 x LAN cable".
Can be easily extended with existing LAN cables CAT5e or above.
Please do not use with PTZ cameras that require more than 1A, as the power consumption is larger than 1A.
If you use it, please install this product on both ends of the LAN cable and use the camera to confirm it works.
If the voltage is insufficient, please replace the ACDC adapter with a little higher voltage than 12V and adjust the voltage.
The products described on this page are JAN acquired product that is only sold by high value direct only.
Please refrain from doing cheap actions.
In addition, we cannot respond to inquiries, returns or exchanges for products purchased outside of high value direct.
Please contact the store that you purchase.
Product Specifications:
Model Number: 12V-POE-SPLIT
Product Name: Waterproof IP Camera for POE Splitter 12V
The color of the gasket may differ depending on the arrival time. Ring Washer: Red and Blue, Tubular Washer: White and Black
Estimated Wire Distance: About 164.4 ft (50 m) (may vary slightly depending on camera power consumption and LAN cable type/grade).
Compatible Camera Standard: IP Camera
Supported Power Supply: DC12V (Center Plus),
Power output allowable current: 1A max.
(LAN cable quality and distance may decrease the current value and the voltage drop is larger)
Terminal standard (recorder end): 0.2 - 0.08 inch (5.5 - 2.1 mm) DC jack (power input), RJ45 male (video output).
Terminal standard (camera end): 0.2 - 0.08 inch (5.5 - 2.1 mm) DC plug (power output), RJ45 male (video input).
Common Terminal: RJ45 LAN port
LAN cable requirement: CAT5e or CAT6
LAN Cable Gauge Standard: 24-16AWG / Single Wire / Straight Wire (wiring pattern is TIA/EIA-568-B or TIA/EIA-568-A)
It is recommended to use with "single wire/straight LAN cable" as the single wire is more likely to flow more current than stranded type wire.
Material: ABS.
Size: 1.1 x 0.7 x 0.8 inches (28 x 19 x 20 mm) (not including cord), Cable Portion: Approx. 3.5 inches (9
The LAN connection part is waterproof, but the terminals that do not have a cover such as the camera side or DVR side are not waterproof.
Operating Environment: Temperature: 14°F to 154°F (-10°C to 70°C), Humidity: 0 to 90% (but without condensation).
Product Contents: Main unit x 2 (1 recorder side x 1 camera side).
Please use the included power adapter to power the camera. If the voltage drop occurs due to long distance extension, please measure the voltage drop and use the power adapter that is suitable for the minute.
(Example: A 12V adapter with a 50m distance connected to the LAN and a voltage drop down to 10V at the camera. Using the 14V power adapter, it becomes 12V at the camera and the camera work.)