Feature
●Product Size: Approx. 18.9 x 0.08 x 18.9 inches (48 x
●Material: flame retardant non-woven fabric
●Made in Japan
●Compatible Sizes: Blade Diameter: 7.9 inches (20 cm) / 9.8 inches (25
●Contents: 3 x Cap filters, 1 x frame
Description
Product Description
Wrap-on fan filter
The entire ventilation fan can be completely covered so it can protect oil stains well.
Easy to install and remove
Amazon.com Review
●フィルター周囲にゴムが入っている、取り付け簡単な換気扇用フィルター
●フィルターの巻き込み防止フレームは、ピラミッド構造で軽くて丈夫
●羽根径20·25cmの換気扇に取り付け可能
●油、ホコリなどをしっかりキャッチして、換気扇の汚れを防ぐ
●油、ホコリなどをしっかりキャッチして、換気扇の汚れを防ぐ
From the Manufacturer
Just put it on and go. Fan Filter
When it gets dirty, simply replace the filter for easy and convenient use.You can easily cover the oil stains of the fan that is difficult to fall off.
The flame retardant non-woven fabric filter prevents grease, dust, etc., making cleaning the ventilation fan a breeze.
Each filter has an estimated usage time of 1 to 2 months, but it may vary depending on usage conditions, so please check the condition of dirt and replace it.
Elastic
Elastic around the filterThe thick and stretchy non-woven fabric wraps around the side of the fan so the sides of the fan do not get dirty.
Resource recycled, regenerated PET filter that does not generate dioxins during incineration.
Comes with a dedicated frame to prevent rolling up.
The anti-roll filter frame has a pyramid construction that is lightweight and durable.Whats more, it is very easy to assemble and install.
Can be used with ventilation fans of all manufacturers with a blade diameter of 7.9 - 9.8 inches (20 - 25 cm) including Mitsubishi, Toshiba, National, Takara and Sunwave.
Installation Instruction
|
|
|
|
|---|---|---|
Mounting the frameSpread the frame into a chevron shape.Adjust the bend angle of the frame to match the shape of the fan cover you have, and secure it with 4 double sided tape strips.Please peel off the release paper of the double-sided tape to ensure it is sticky. |
Cover the filterElastic around the filterCheck the filter corners and secure it to the fan cover.(Filter is square when spread out) Cover the filter from the front side of the fan cover and turn all four corners of the filter to the back of the fan cover to remove the sagging of the filter. |
Install the ventilation fan coverInstall the ventilation fan cover.After installation, make sure the frame is securely fixed and there is no sagging in the filter. |
