If you have a garden, you must need this soil detector
Instructions:
Step 1: Switch to humidity / pH / light as needed.
Step 2: You need to insert the probe into soil 2/3 and about 15 cm deep. Measurements are accurate (please be careful. Cannot be inserted directly into water for testing)
Step 3: Adjust the probe until the dial pointer swings slightly.
Step 4: After 10 minutes check the moisture / pH / light level in the dial
Step 5: After each use, remove the probe from the soil and wipe it.
How to judge?
Soil Water Measurement:
The button of the pen is wet and damp, and the corresponding table is damp, dry, and wet 1-3 (red part) indicates you need a swimsuit (green part). Adjust the swimming time according to the different plants of the plant, 8-10 (blue part) indicates that it is too wet.
Soil pH Measurement:
Switch PH button to PH, PH is PH key, corresponding table is 8-3.5 value, alkaline is alkaline, ACDIC is acid, 7 value is basically neutral, small values. According to the variety of plants, the acidity of the soil pH regulated
Lighting value measurement:
Light key is luminous. The measurement range is 0-2000 lumens. The higher the value, the better the light. Follow the various plants to determine if shading is needed.
If you have any questions, please feel free to contact our customer service.