Feature

●Set Contents: 3 piece set. Cable Holder Cable Joint
●This is a welding cable mainly used on the secondary side of the arc welder. 1 type cable for conductors (coated with natural rubber cab tires as a conductor) / Cable (WCT): 300A: 1.5 in (38 mm) 2 / Cable Length: 5.9 ft (15 m) / Finish Outer Diameter: 0.6 in (14.5 mm) / Allowed Current: Continuous 150 A / Sheath Thickness: 0 mm
●Grounding Clip/Welding Current: 300 A; Wire Connection Method: Terminal Stop / Maximum Pinching Capacity: 2.0 inches (50 mm) Grounding connection is fully made, so there is no need to worry about lowering work efficiency and burning out wires and welding machines
●No tools required for installation without damaging the welding, so you can easily and safely attach the ground. The pressure of the screw makes it completely set up, with little contact resistance, and no temperature rise
●Cable joint (male); Connection method: Screw fastening; Rubber cover included; Length: 7.9 inches (200 mm); Weight: 10.6 oz (300 g)


Description

Set Contents: 3 piece set. Cable Holder Cable Joint
This is a welding cable mainly used on the secondary side of the arc welder. 1 type cable for conductors (coated with natural rubber cab tires as a conductor) / Cable (WCT): 300A: 1.5 in (38 mm) 2 / Cable Length: 5.9 ft (15 m) / Finish Outer Diameter: 0.6 in (14.5 mm) / Allowed Current: Continuous 150 A / Sheath Thickness: 0 mm
Grounding Clip/Welding Current: 300 A; Wire Connection Method: Terminal Stop / Maximum Pinching Capacity: 2.0 inches (50 mm) Grounding connection is fully made, so there is no need to worry about lowering work efficiency and burning out wires and welding machines. No tools required for installation without damaging the welding, so you can easily and safely attach the ground. The pressure of the screw makes it completely set up, with little contact resistance, and no temperature rise.
Cable joint (male); Connection method: Screw fastening; Rubber cover included; Length: 7.9 inches (200 mm); Weight: 10.6 oz (300 g).