Remove the net holding with a screwdriver and remove the mesh.Cut the new mesh slightly larger than the frame, place the mesh and the frame parallel and push both ends of the mesh insert into the groove, temporarily fasten and drive in order with a plastic hammer etc.Do the same with the other side and the rest of the product.Place the cutter on the outside of the net holding and cut off the excess mesh.Can be stretched with mesh or rubber.(Use 4.5 or 5.14 mm thickness.)

Please do not use for purposes other than the net for screen doors.There may be crevices on it, but if you put it on the screen sash, the streaks will disappear.Work at temperatures above 30°F (10°C).Do not place near fire.Do not lean against the screen door.If this product gets dirty, you can vacuum the debris between the piles and then wipe it with a damp damp cloth with a mild detergent.We recommend replacing the net every year.Color fading may vary depending on where it is installed.Due to the printing process, there may be slight differences in color even with the same pattern.When discarding the net, please follow the divided sections in your local province.Keep out of reach of children and away from direct sunlight.