Compatible tube outer diameter D1 (in): 0.3 (8 mm)
Fluids: Air, water
Usable temperature range: Air: 0 - 60 °C, Water: 0 - 30 °C (Do not freeze). )
Hex diagonal: 0.7 inches (17 mm)
Compatible fitting size: D2 mm (0.57 in) (12 mm)
Fluids: Air, water
Fluid temperature: Air: 0 - 60 °C, Water: 0 - 30 °C (Do not freeze). )
Maximum Working Pressure: Air: 0.97 MPa, Water: 0.19 MPa
Vacuum pressure (when used liquid is air): more than 1.4 kPa
Applicable tubes (when fluid is air): Nylon tubes (AS1, AS4), tube for spot welding equipment (SP4, SPF), polyurethane tubes (UH, UFL, UE, UC)
Applicable tube (when fluid is in water): Nylon tube (AS1), tube for spot welding equipment (SP4, SPF)
Material/Finish: Main unit (resin part) / PBT
Note: If the maximum working pressure of the tube is lower than the above pressure, please use it under the maximum working pressure of the tube.
When using other than applicable tubes, the outer diameter is within ±0.004 inch (0.1 mm) of nylon and the urethane within ±0.006 inch (0.15 mm), please use tubes with the maximum outer diameter - the minimum outer diameter of 0.008 inch (0.2 mm).
Made in Japan.
Code number: 383-8356
The metal parts are electroless nickel plated.
The R (PT) screws have a color seal of R(PT) threads that allows you to distinguish the size of the screw at a glance.
The body position can be determined according to the direction of the tube being taken out.
The R(PT) threads such as elbow and tape and the resin joints rotate, allowing you to freely position them according to the direction of the tube retrieval after fitting is installed.
Also, screws can be tightened while the resin part is in place.
The tube grip rotates smoothly within the fitting to prevent the tube from turning out.
For general air and water pressure pipes
For robots and labor-saving equipment.
This is a product for business contractors.