Please note:
The double-sided tape is included, but there may be cases where large windows may not be enough.
In that case, we are very sorry, but we ask you to purchase double sided tape by yourself.
If you do not stick it properly, it will create a gap and bugs will come in. Thank you for your understanding.
Please be sure to stick it on the outside of the screen frame ***
[Preparation before sticking]
Please wipe the surface of the screen frame with dirt, oil, etc. beforehand. If there is any detergent or oil residue, it will not stick well.
Measure the dimensions of the screen frame where the sheet is applied.
Please draw a cut line on the sheet before cutting the dimensions.
Use a ballpoint pen or pencil (2B), and cut carefully along the line with a pair of scissors.
Cut the sheet to the size of the screen door.
Note:
Please do not cut the screen frame with the cutter.
The screen frame may be damaged or rusted.
[Installation Instructions]
The sheet is affixed to the outside of the screen frame.
There are front (outside) and back (inside).
Please stick the side of the screen frame with the sticker on the back side of the screen with the double-sided tape.
1. First, attach the double-sided tape to the left and right side of the screen frame.
Attach it to the left and right side as well as the top and bottom to prevent insects from entering.
2. After applying the double-sided tape, peel off the protective paper of the double-sided tape.
At this time, instead of removing all the protective papers from the protective paper first.
3. Paste the top side of the sheet pre-cut to the edge of the sheet to ensure no distortion or tarmi.
If there is any distortion or talumi, please slowly peel the sheet from the double-sided tape and adjust it again.
4. After confirmation, peel off the protective paper from the left and right about 11.8 inches (30 cm) from the top, then paste the sheet.
Then peel off the protective paper from the top of the right side of the sheet approximately 11.8 inches (30 cm) and lightly stick with your hand from the center of the sheet.
Repeat the work to the bottom of the process.
5. Finally, peel off the protective paper on the bottom and stick the sheet and youre done.
Even if there is any distortion or sagging, you can reposition it at the first time.
Please gently peel the tape off the screen frame and reposition it again to prevent sagging.