Feature

●Faucet Body Size: Base Height: 5.7 inches (14.5 cm), Hand Height: 5.1 inches (13 cm). Spout Range: 7.1 inches (180 mm) Mounting Base Diameter: 20.5 inches (52 cm). Working Pressure: Minimum 0.5 bar, Maximum 10 bar Shower Hose Length: Approximately 4.9 ft (1.5 m), Can be adjusted at any angle up, down, left and right
●Material: Copper, stainless steel (shower head is heat-resistant ABS resin with chrome plating)
●(High Quality) This single lever mixing faucet is a telescopic shower nozzle type that is very useful for kitchens and bathrooms. This mixing faucet features a leak-proof ceramic spool. Recommended for those who are thinking of replacing their old faucet
●Drawer Design: The hose can be pulled out, so it is convenient for rinsing hair and cleaning the basin. Splash-proof foam shower Less cleaning time. Wide range of use. The spout can be pulled out and used as a hand shower, so you can clean the entire corner of the sink. It is easy to wash large sinks and washbowls
●Two stage switching switch (shower and normal): Can be switched between rectifiers and showers. *Minimum 0.5 bar water pressure, we recommend that this product is 1 bar water pressure is better. *Accessories other than the main unit: 2 mounting hoses (23.6 inches (60 cm))


Description

Installation Method 1. Screw on the metal: Tighten with the fixing block. The water supply and cold water pipe are connected to the faucet body. 2. Put the faucet body into the aquarium. 3. Attach the rubber mat and metal mat to the faucet body and secure it with fixing tools. 4. Attach the hose to the heat and cold air mat. Tighten with an adjustable spanner until it fits snug. Open the cold and stop angle to check if there is no leakage. Turn straight or shower with lever on the left Hot or hot water swings left and right with center handle. Pull the center lever from top to bottom.