Product Description

Wouldnt you like to have a chair a little easier when wearing shoes in the entryway?" Have you ever thought youre not an elderly person?
The "High Logic One-Touch Chair" is a folding chair for your entryway that can be folded down and stored neatly when it comes to jama.
It will not get in the way if it is folded into a snap. Can be used widely in narrow entrances. A folding chair that is gentle on health people.
■ For a fine chair of 11.8 inches (300 mm) from the wall when using! - When stored, it can be easily 1.3 inches (34 mm) from the wall.
Installation is very easy, no need for heavy work. Simply select the place of the wood screws and stop the screws on the wall (comes with a 11.8 inch (30 cm) long driver for convenient installation).
This product is gentle on humans. When using, simply lift the chair up lightly and the locking function automatically locks into place. To fold, simply hold the chair slightly upward and push the lever on both sides of the metal fittings.

Legal Disclaimer

●Returns and exchanges cannot be accepted

From the Manufacturer

■Material: Chair plate/Laminated wood bracket/SPHC (steel)

■ Included parts include chair board (with 2 brackets) 1 pair bracket fixing wood screws SUS304 M3.5 x 25 8 pieces

1 x Long Screwdriver 11.8 inches (30 cm)

• ■ Comes with a long screwdriver for convenient installation.

Folding Chair for Entryway

One-touch Chair 97303

Load Capacity: 220.5 lbs (10

• Wouldnt you like to have a chair a little easier when wearing shoes in the entryway?" Have you ever thought youre not an elderly person?
• When the one-touch chair starts to start, this folding chair can be easily folded and stored in a snap.
• If you have this on a lower entryway, you can transform it into an easy entryway.
• One-touch Load Capacity 220.5 lbs (100 kg) with Product Liability Insurance

Installation

● Choose a place for the wood screws and determine the mounting position of the bracket.Make sure that it is parallel to the floor surface.If it is not parallel, it will not fold up until the end.

The mounting position (height) should be determined by aligning the tip of the chair board to the 3.1 inches (80 mm) from the floor surface.

Once the installation position is complete, please temporarily secure the bracket (we recommend working with 2 or more people), lightly drill a hole with a tight loop or a thousand thread, and tighten it with wood screws.(Please use the included 30cm long driver for installation. )

● Each bracket has 6 holes, please use wood screws (included).