Product Description: Instant heating electric hot water plug that does not require installation and is small and space-saving electric hot water faucet. It can be used quickly in 3 seconds. It can be adjusted to your preferred temperature. It can be used for both cold and hot and explosion-proof, freeze prevention, separation and electrical leakage. Suitable for kitchen and bathroom helpers. Specifications: Product Name: Electric Faucet Product Material: ABS + Stainless Steel Pipe Diameter: 4 Tube Diameter Hot Water Temperature: 30 ~ 60° Rated Voltage: 110 V Waterproof Level: IPX 4 Rated Pressure: 0.15-0.6 MPa Power Cord Specifications: 1.5 m Rated Power: 3000 W Power Cable Length: 1.1 m Water Pressure: Do not purchase if the water pressure is too low. It takes 5 seconds to fill a 16.9 fl oz (500 ml) mineral water bottle. About water temperature: 30 - 60 degrees Celsius (30 - 60 degrees Celsius). When installing, please make sure to put water first, and turn on electricity. Please install the product vertically and do not install it horizontally or diagonally; Modification of the faucet is strictly prohibited. The product is installed vertically and cannot block the water inlet and exit. Water supply port cannot be installed on water purifiers, washing machines, etc. If the water is frozen under freezing conditions, please unplug the power supply. Installation Notes: ● Power tap, adapter, extension cord; ● 110V wiring requires 2.5 square meters of 2.5 square meters. Installation upside down or sideways is strictly prohibited. ● Please pass the cold water test for the first time, and turn on the heating electricity after the water becomes smooth.