Feature
●(How to install grommet on one side) 1. Use the hole punch to drill a hole in the leisure sheet. Please drill a hole that is 0.5 mm larger than the inner diameter of the grommet you use. 2. Insert the grommets on one side from the front side. 3. Place the doughnut-shaped plate with holes (recessed links) on the surface of the grommet. The back of the grommet should be placed on the tubular part (convex links) with the center of the eyelet. 4. Firmly grip the lever of the eyelet punch. Now you have got it!
●(Includes 100 Grommets) There are 100 grommets. For those who first use grommet punches, please check it. Can be used for binding documents, reinforcing belt holes and accenting hats
●(4.5 mm type for detailed work) Compatible with eyelets with 0.18 inch (4.5 mm) inner diameter, making it easy to use for detailed work. Recommended for handmade writers and people who use many grommets. Eyelet hole diameter (Φ): 0.18 inches (4.5 mm); Hole drilling dimensions (Φ mm): 0.2 inches (5 mm)
●Quality assurance: You can purchase with confidence and satisfaction, and we aim to use this product for a long time. If there is any inconvenience or defective or damaged due to our mistakes, or size differences, please contact us by email and send it back by payment. We will replace it as soon as possible
●[Scope of application] Reinforcement and repair holes for cardboard, fabric, vinyl, leather, and leather. (Note: If you use a grommet punch that doesnt fit the size, the eyelets will warp, and it cannot be installed correctly. Please check the inner diameter size of the grommet you use and choose the correct grommet punch for your grommet punch. )
Description
Eyelet Punch: You need special tools to attach the grommets.Grommet is a metal or resin ring that can be attached to reinforcing holes in paper, fabric, etc.Used for lacing and belt loops.Since the grommet cannot be attached alone, we use the dedicated eyelet punch.(How to install grommet on one side) 1. Use the hole punch to drill a hole in the leisure sheet.Please drill a hole that is 0.5 mm larger than the inner diameter of the grommet you use.2. Insert the grommets on one side from the front side.3. Place the doughnut-shaped plate with holes (recessed links) on the surface of the grommet.The back of the grommet should be placed on the tubular part (convex links) with the center of the eyelet.4. Firmly grip the lever of the eyelet punch.Now you have got it!Material: Zinc Alloy, Carbon Steel Pliers Size: 6.5 x 6.1 inches (16.5 x 15.5 cm) / 6.45 x 6.1 inches (6.45 mm) / 0.17 inches (4.5 mm) / Eyelet Quantity: 100 pcs Weight: 100 g (Approximately)