Introduction to Hand Hammered Tools: For small clams. Introduction to hand hammered tools, the indentations of the rod are sized to match the clamps. A hand hammered tool that allows you to strike a single side (both legs and long feet) and double sided boning. Unlike professional (hardening tools) dedicated to clamps, this hand hammered tool is silver and affordable. Practice is required to hit cleanly with hand hammered tools. Please be careful not to hurt your hands when using it. How to install the small bucklet: 1. Drill a hole (0.08 inch (2 mm) diameter hole) through the small knuckle with a tool such as a hole punch. 2. Pass through the small knuckle feet through holes or leather. For a single side of the corrugated surface, or for double sided boning, use a base with indentations that are indented to the round of the head (such as a serial plate) to set the extra small coasters on the base. 3. Place the fabric on the top of your feet to cover the small coat. 4. Place the small knitting rod on the head of the claws. Stand the hammer vertically and firmly knock the mallet from the top. 5. The clamps will fall down in your head and stop. *Our tools are customized to match the hardware we carry in our store. It may not match your hardware. Thank you for your understanding.
Please note that all tools are consumable and will not be able to return the item if purchased by mistake. The tools are also specified to match the shape of each metal and may not match the hardware you have. Thank you for your understanding