About 12 Hour Timer:

4 Convenient Working Modes: You can control the power in any way you like, including constant power, light sensor, timer, and light + timer.

Constant power consumption: Turn the function key to 0.The equipment maintains continuous output.It is an extension cord with a switch.

Light Sensor + Digital Timer: When the surrounding environment becomes dark, the switch will automatically turn on and the switch will automatically turn off after a certain time (can be set to 12 hours).

Light Sensor: Literally a setting that only light sensor will work.Automatically turns the switch on when the surrounding environment becomes dark.Automatically turns the switch to OFF.

When you set the time with only the digital timer, the switch will automatically turn off after a certain amount of time.

Note:

Includes memory function: When using 2 modes: "light sensor" and "light sensor + timer", set it once, and it will work repeatedly on the next day.If the other 2 modes are turned off, it will not repeat.

Please note that the memory function will lose memory if you remove it from the outlet.

About 8 Hour Timer:

Enhanced version! New version.

(Improved Problems)

Brightness Sensor: Brightness 40 lux or more, ON under 20 lux

It will not turn off when the sun goes on under 20 lux.Thoroughly improves the appearance (flashing)

Timer Memory Function:

Have you ever detected suddenly strong light in the dark and the timer setting disappeared?

30 minutes of extra time, the timer will continue to count down even if it senses strong light within 30 minutes.

Use for illumination, signage, street lights, work lights and floodlights.

Just connect it between the light fixture and the outlet, it will automatically turn on when it comes to night and turn off automatically when it comes to an entrance, security light, decorative light, garden light, work light, etc.With a timer you can also set the light off time.

Easily set 3 working modes:

1. Constant power flow mode: Always switch on mode.

2. Light Sensor Mode: Automatically turns on and off depending on the ambient brightness (light sensor), and turns on when ambient dark.

3. Light Sensor + Timer Mode: Mode that can be set until the switch is turned off (light sensor + timer); Timer: You can set it in 2-8 hours increments.

Depending on the orientation, angle, weather, etc., the timing of the unit may be turned on or off.

Rainproofing points for use.

Hang the hole on the back of the main unit to a wall or tree. Leaving it on the ground will make it difficult to prevent accidental kicks and shocks.In addition, please hang it to prevent water from entering the gap for a long period of time in the wire.It will also extend the life of the product.

Note (Disclaimer) > Please read

This product is not completely waterproof.Please do not use in water or in areas where water accumulates.

If the plug or outlet connected is not rainproof, it will not be rainproof.

Do not use on other electrical products other than lighting fixtures.