?How to use:
1. Drill holes with punch.
0.2 inch (5 mm) hole where you want to attach the top part.
Drill a 0.14 inch (3.5 mm) hole in the area where you want the bottom part to attach.
2. Prepare the lower part.
Four spring hooks are also included in one set.
3. Pass through the hole for those with elongated protrusions.
Insert the parts from the back of the hole with elongated protrusions.
4. Cover the other part
One round nibbed top
5. Place the hammer vertically (90 degrees) and tap it with a mallet.
The hitting kit comes in a set of 2.
The recess can be applied to the protrusions
The hand is firmly attached to the rubber plate and fixed the hitting vertically
Though you knock the hammer with a mallet, please be aware that you knock it vertically and straight.
Just hit the metal fittings until they stop turning.
6. Prepare the upper part.
They are attached from parts with large holes.
7. Place the large hole part from the back of the leather to the hole
8. From the leather surface
Insert the other part into the hole, set it on top of a consecutive dish, place the hammer vertically and tap it with a mallet!