Feature

●Positioning: Holds pipes tightly; Anti-vibration rubber prevents slipping and scratches
●Multi-purpose: Pipe clamp, pipe stay, pipe joints, hanging hardware
●Expansion of Applications: Can be replaced with the included bracket and mount
●Made of Resin: Lightweight | Weather Resistant | Easy to install and remove from the middle of the pipe
●A: 1.3 - 1.4 inches (34.8 - 35.3 mm); C: 1.0 inches (25 mm); D: 0.4 inches (20 mm); D: 0.4 inches (10 mm); t1: 0.2 inches (4.0 mm); t2: 0.1 inches (3.0 mm)


Description

Pipe positioning and preventing slippage

Pipe Clamp, Pipe Joint Clamp, Stay, Pipe Stay, Fog Lamp, Stainless Steel Pipe, Pinching, Scissors, Mounting HardwarePipe Clamp, Pipe Joint Clamp, Stay, Pipe Stay, Fog Lamp, Stainless Steel Pipe, Pinching, Scissors, Mounting Hardware

Lightweight and easy to use

The minimum weight of the size is [0.4 oz (10 g) with resin bolt nuts and [0.7 oz (20 g).

It is very light weight and reduces the burden of carrying and power energy.

Pipe Clamp, Pipe Joint Clamp, Stay, Pipe Stay, Fog Lamp, Stainless Steel Pipe, Pinching, Scissors, Mounting HardwarePipe Clamp, Pipe Joint Clamp, Stay, Pipe Stay, Fog Lamp, Stainless Steel Pipe, Pinching, Scissors, Mounting Hardware

Easy to put on and take off

Moderately flexible resin allows for easy removal and removal from the middle of the pipe.

Please note that excessive spread may cause damage to the product.

Pipe Clamp, Pipe Joint Stay, Pipe Stay, Fog Lamp, Stainless Steel Pipe, Pinching, Scissors, Mounting Hardware, Anti-Slip, RubberPipe Clamp, Pipe Joint Stay, Pipe Stay, Fog Lamp, Stainless Steel Pipe, Pinching, Scissors, Mounting Hardware, Anti-Slip, Rubber

Gaps open

Due to the assumption of mounting other parts, such as brackets and mounts, there will be a gap of approximately 0.4 inches (10 mm) when attached to the appropriate size pipe.

If you want to apply more torque and tightened, please attach a 0.4 inch (10 mm) washer or nut, etc. to the gap.

Pipe Clamp, Pipe Joint Clamp, Stay, Pipe Stay, Fog Lamp, Stainless Steel Pipe, Pinching, Scissors, Mounting Hardware, Resin, Stainless SteelPipe Clamp, Pipe Joint Clamp, Stay, Pipe Stay, Fog Lamp, Stainless Steel Pipe, Pinching, Scissors, Mounting Hardware, Resin, Stainless Steel

Available in a wide range of sizes

Available in sizes from [8φ] to [106φ] in total [60] and above to match any pipe.

Depending on the size, the thickness of the base material, the thickness of the anti-vibration rubber, and the thickness of the adhesive sticker may vary.

Expand your ideas| Useful in a wide variety of DIY scenes.

Pipe Clamp, Pipe Stay, Seat Stay, Tail Lamp, Bicycle, Road Bike, Mounting Hardware, Pipe Joints, OutdoorPipe Clamp, Pipe Stay, Seat Stay, Tail Lamp, Bicycle, Road Bike, Mounting Hardware, Pipe Joints, Outdoor

Installation stays

Mount Tail Lamps & Tail Lights to Bike Fender Stays. Mount your Smartphone Holder or Dash Cam to the Front Fork to the Mirror Stay.

Metal Rack, Vertical Pipe, Horizontal Pipe, Pipe Clamp, Pipe Joints, Post Fixing Bracket, Mounting Hardware, Prevents Shifting, OutdoorMetal Rack, Vertical Pipe, Horizontal Pipe, Pipe Clamp, Pipe Joints, Post Fixing Bracket, Mounting Hardware, Prevents Shifting, Outdoor

Reinforced Stay

For vertical pipes such as racks, tassels for bundling curtains as auxiliary and reinforcement when mounting angles or horizontal pipes, or mounting hardware for vertical pipes for hanging ornaments on antenna mast or various posts.

Lawn Mower, Grass Trimmer, Belt Hanging, Strap Hanging, Elastic Cord, Hanging Brackets, Pipe Clamp, Pipe Joints, Mounting Hardware, OutdoorLawn Mower, Grass Trimmer, Belt Hanging, Strap Hanging, Elastic Cord, Hanging Brackets, Pipe Clamp, Pipe Joints, Mounting Hardware, Outdoor

Hanging hardware

To distribute the weight of a grass mower (grass trimmer ) and increase work efficiency, use it as a belt hanger when attaching elastic cords or straps, as a mounting hardware for hanging straps on flashlights or action cameras sticks.

SUS Bolt Nut

Choose from bolt nuts

Supports strong tightening

Aesthetical

Lightweight

Hex Head Head

Bolt shape

Hex Head Head

Full Thread

Threaded Type

Full Thread

Hex Nut 1 type; Flat Washer x 2

Other Materials

Hex Nut 1 type; Flat Washer x 2

Precautions

The surface oil may transfer color.

Supports strong tightening

Aesthetical

Lightweight

Hex Head Head

Bolt shape

Hex Bolt

Full Thread

Threaded Type

Half Threaded

Hex Nut 1 type; Flat Washer x 2

Other Materials

Hex Nut 1 Type

Precautions

Please be sure to install it by hand tightening.

Learn More
Learn More

Available in a variety of colors

Pipe Clamp, Fog Lamp Stay, Pipe Stay, Pipe Fixing Bracket, Hanging Belt, Plumbing Support Bracket, Plumbing Fixing

black

Pipe Clamp, Fog Lamp Stay, Pipe Stay, Pipe Fixing Bracket, Hanging Belt, Plumbing Support Bracket, Plumbing Fixing

White

Pipe Clamp, PVC Pipe, Embi Pipe, Pipe Stay, Pipe Fixing Bracket, Hanging Belt, Plumbing Support Bracket, Plumbing Fixing

grey

Pipe Clamp, Pipe Fixing Fittings, Motorcycle, Fog Lamp, Stay, Pipe Stay, Hanging Bracket, Belt Hanging, Plumbing Support Bracket, Pipe Fixing Fittings, PVC Pipe VP

light grey

Pipe Clamp, Pipe Fixing Fittings, Motorcycle, Fog Lamp, Stay, Pipe Stay, Hanging Bracket, Belt Hanging, Plumbing Support Bracket, Pipe Fixing Fittings, PVC Pipe VP

Silver

Pipe Clamp, Pipe Fixing Bracket, Motorcycle, Fog Lamp, Stay, Pipe Stay, Hanging Bracket, Belt Hanging, Plumbing Support Bracket, Milky, Milky White

milky

Pipe Clamp, Stay, Pipe Stay, Pipe Fixing Bracket, Pinching, Post Fixing Bracket, Stainless Steel Band, Envy Pipe, PVC Tube, Pipe Band, Chocolate, Brown, Hanging Band KFBS21B

chocolate

Customer Reviews
4.0 out of 5 stars
1
4.6 out of 5 stars
8
—
3.0 out of 5 stars
1
—
5.0 out of 5 stars
1
—
Description
Matte black with a low gloss | Suitable for a wide range of occasions Clean white | Suitable for water areas Dark gray with a little bluish Gray with light tones close to groin. Dull Gray | City Recycling Mechanism Specified Color Off-white yellowish white Dark Brown
Applications
Stainless Steel Pipe | Black Pipe | HIVP Pipe Metal Rack | Flexible Tube for Water PVC pipe (VP) for supply and drainage PVC pipe (VU) for supply and drainage PVC pipe for supply and drainage (silver grey) Water Flexible Tube | PVC Tube (Milk White) PVC Tube for Electrical Use VE Tubes
Tightening Bolt Nuts
Resin|SUS|SUS Black Resin | SUS Resin | SUS Resin | SUS SUS Resin | SUS SUS
Available in a variety of sizes
◎ ◎ ● ● △ △ ●
Outdoor use
◎ ● ● ● ● ● ●

What size should I choose if it is installed on pipes that are not listed size?

As a general rule, if the outer diameter of the compatible tube is exceeded the maximum value (listed on the right), please select the size up.

The size chart is listed when the bracket or cap joint is connected.

When installed on a pipe, the gap between the mounting part is 0.4 inches (10 mm)?

This product is designed to connect other parts such as brackets and cap joints.

When installed on a pipe, all sizes are all the same and open (approximately 0.4 inches (10 mm)).

If you want to clip thin plate shaped parts, please tighten one size larger than usual.

However, the mounting surface of the bolt nut and base material cannot be paralleled.Please note:

Will the resin bolt screw thread if installed on a slightly smaller pipe? And is the strength a problem?

The resin bolt is a semi-threaded type, but if you tighten it in a way that there is no gaps, it will be sufficiently threaded.

However, it is basically a product that is meant to be hand-tightened with other accessories.

Bolts may break if stress is placed over necessary

If tightening is tightened, please select "SUS Bolt Nuts".

Can I use it outdoors?

Although the basic weather resistance is weak polypropylene resin, our products use weather resistant grade in all colors.

However, due to the usage environment, discoloration and degradation may be promoted,

If using it outdoors for a long time, please use black (estimated duration: 7 to 9 years).

Made in Japan?

By skilled Japanese staff, we strive to carefully mold and inspect each item by hand.

Depending on the size and color, there may be cases where the gate marks.We appreciate your understanding.

Notes and Supplementary Description

Depending on the pipe manufacturer, there may be differences between the nominal diameter and actual dimensions, so please select the appropriate size according to the "outer diameter" as possible.ex. Stainless steel pipe 1 inch (25 mm) diameter to 1 actual size of 1 piece is carefully inspected, but in dark colors, there may be cases where the gate marks and scratches are noticed.This is not a quality problem.Resin bolt nut: Please install with "hand tighten".Tightening may cause damage.SUS Bolt Nuts: To prevent the depression of your base material, please attach the included flat washers one at a time on both outwards.SUS Black Bolt Nut: There may be some oil residue in the surface treatment, so there may be some color transfer when working.The product images use the "representative size", depending on the size, the thickness of the base material (t1), the thickness of the anti-vibration rubber (t2), and the thickness of the adhesive sticker may vary. The anti-vibration rubber uses a basic 0.1 inch (3 mm) thickness (material SBR and hardness 60±5) and some sizes are 0.2 inch (5 mm) thick (material NR, hardness 60±5).Adhesive stickers are available in 3 types: 0.004 inch (0.0135 mm) thick (base material: non-woven fabric) and 0.05 inch (1.2 mm) thick / 0.04 inch (1.0 mm) thick (base material: polyethylene foam).Due to the light and sunlight, the color of the actual item may be different.Certain sizes with a small diameter and thickness of the base material (t) may be difficult to put on and take off.Due to the purpose of anti-vibration aid, this product does not have a clear vibration transfer rate reduction.Because the anti-vibration rubber is bonded to the resin pipe clamp of 1 size up, there may be misalignment between the size chart on the main body and the corresponding outer diameter (nominal diameter).

[With anti-vibration rubber] Product line-up

Pipe Clamp, Stay, Pipe Stay, Pipe Fixing Bracket, Pinching, Post Fixing Bracket, Stainless Steel Band, Envy Pipe, PVC Tube, Pipe Band, Hanging Band KFBS21B

Anti-Vibration Resin Pipe Clamp

Saddle Band, PP Saddle, Pipe Fixing Bracket, Plumbing Support Bracket, Plumbing Fixing Bracket, Cable Wiring, Security Camera, Stay

Anti-Vibration Resin Saddle Band

Saddle Band, PP Saddle, Pipe Band, Pipe Saddle, Joint Pipe Joints, Pipe Fixing Bracket, Wall Fixing Bracket, Plumbing Support Bracket, Pipe Fixing

Resin saddle band base

Camera Mount, Pipe Clamp, Pipe Mount, Pipe Fixing Bracket, Hanging Band, Ceiling, Plumbing Bracket, Pinching, Stainless Steel Band, PVC Tube, Pipe Band, KFBS12B KFBS22B

Anti-Vibration Resin Pipe Clamp with Mount

Pipe Bracket, Pipe Fixing Fittings, Standing Band, Standing Plumbing Fittings, Pinching, Plumbing Support Bracket, Post Fixing Bracket, Stainless Steel Band, Shrimp Pipe, PVC Tube, Pipe Band, KFBS23B KFBS13B

Anti-Vibration Resin Pipe Clamp Bracket Set

Pipe Clamp, Pipe Fixing Fittings, Standing Band, Saddle Band, Pipe Saddle, Pinching Post Fixing Bracket, Stainless Steel Band, Envy Pipe, PVC Tube, Pipe Band, KFBS24B KFBS14B

Anti-Vibration Resin Pipe Clamp with T-Bracket

Pipe Clamp, Pipe Fixing Bracket, Pinching, Post Fixing Bracket, Pinching, Parallel Coupling, Stainless Steel Band, Envy Pipe, PVC Tube, Pipe Band, Glasses Band

Anti-Vibration Resin Double Pipe Clamp Set

Customer Reviews
4.0 out of 5 stars
1
4.7 out of 5 stars
15
4.5 out of 5 stars
5
5.0 out of 5 stars
3
5.0 out of 5 stars
2
4.4 out of 5 stars
7
4.6 out of 5 stars
6
Price
¥809 ¥799 ¥549 ¥1,499 ¥1,069 ¥1,499 ¥1,639
Model number (Resin, SUS, SUS, Black).
KFBS11B|KFBS21B|KFBS31B KFBS01B KFBS02 KFBS12B|KFBS22B|KFBS32B KFBS13B|KFBS23B|KFBS33B KFBS14B|KFBS24B|KFBS34B KFBS15B|KFBS25B|KFBS35B
Application
Pipe positioning and preventing slippage Raised from the mounting surface to secure the pipe. For adjusting the height of the installation of the anti-vibration resin saddle band. Camera Mount | Secures Sideways Running Tube Hanging from Ceiling Extends the height from the wall to fix the pipe Raises 1.4 inches (35 mm) from the mounting surface to secure the pipe. Secures 2 pipes parallel or straight.
Features
Can be used as pipe stays, hanging hardware Resin saddle band base (sold separately), height can be adjusted by 0.2 inch (5 mm) By stacking the number of sheets, it can be adjusted by 0.2 inches (5 Compatible Bolt Diameter: W3/8 Height: 50 - 200L | Easy to cut and adjust height 4mm range of motion in the upper direction Length: 50 - 200L | Easy to cut and adjust length.
PACKAGES
— — — Anti-Vibration Resin Pipe Clamp | Resin Mount Anti-Vibration Resin Pipe Clamp | Resin Bracket | Resin Base Anti-Vibration Resin Pipe Clamp | Resin T-Bracket 2 x Anti-Vibration Resin Pipe Clamps | Resin Brackets | Resin Caps
Number of Colors Available
8 colors 8 colors 9 Colors 8 colors 8 colors 8 colors 4 Colors
Quantity:
1 pc | 4 pcs 1 pc | 4 pcs 4pcs|10pcs|20pcs 1pcs 1pcs 1pcs 1pcs
Notes
— — Please make sure to check the compatible pedestal size of the saddle. — The product page may differ due to bracket diameter and bolt nut material. — The product page may differ due to bracket diameter and bolt nut material.