YSS rear gas shock
Product Number: TB220-285T-01-82P-X
Fits: Honda PCX 150 2012-2013
Mounting part dimensions: Upper side: Φ0.4 x 0.8 inches (10 x 20 mm), Lower side: F.20 x M8 mm), Mounting pitch length: 11.2 inches (285 mm)
Spring Specs: 46-16-31-180 mm Stepless Spring Preloaded
High pressure nitrogen gas
Nitrogen gas compresses the oil for a consistent riding feel without sacrificing performance.
Progressive damper
The dampening force of the damper is controlled according to the piston speed and load and will always control the vehicle body with optimal damping.
Progressive spring
Unequal pitch springs provide optimum rate characteristics for all loads
Before installation
Refer to service manuals issued by the vehicle manufacturer and prepare tools necessary for the job. Please read the included instruction manual before installing.
Installation Notes:
Overtightening of suspension mount bolts will adversely affect the operation of the product.
After installation, please make sure that the suspension does not interfere with the peripheral parts (swing arm, muffler, drive chain, etc.)
Suspension swings to the back of the body as you stroke. Please make sure there is enough clearance around the frame and mount.
◆About the standard setting
YSS Suspension sets a spring rate based on a single passenger ride. If you have a large drop from the standard weight (65-75kg), or if you are running a tandem or circuit as the main one, we recommend replacing the option spring.
This product is imported and does not have a manufacturers warranty. Returns and **will only be accepted for 7 days after the product arrives. There may be scratches or dents as this is an imported product