Feature(may vary by option.)

●Original Product by Miracle Maker Please be aware that you will see counterfeit sellers
●Mirror type prism color coordinates with the burnt color of the scarf to make your feet look stylish.
●Clean the rim of the wheel and remove dirt and oil thoroughly before sticking.
●No dryer. Easy type just to stick
●Detailed instructions for installation that will not be mistaken:

[12 inches]




[17 inches]




[14 inch]





Description

Miracle Maker Original Product Please be aware of counterfeit sellers will be seen. Miracle Maker pursues customer satisfaction with quality control and warranty. Speedy Rim Sticker Prism Mirror 7 Color Changing Custom Sticker Tune 17" (17,18" compatible) Suitable for most bikes over 250cc ■How to paste without mistaken·If working outdoors, it is recommended that you use it in low wind. Add a few drops of water and mild dishwashing detergent in a spray bottle that is sold 100 uniforms. Prepare the wheels with a part cleaner or car shampoo to remove sand, dust, and oil. Wipe the spray bottle with plenty of water on the wheel. Rinse the remaining dust from the rim with water. ·Spray the sticker on the adhesive side of the sticker when removing it. When water becomes familiar with the wheel, apply it to the rim sticker as if it is placed on. When the position is determined, you can remove the water on the back of the sticker and rub it with your finger over the sticker and stick it on. If the position is misplaced, it can be removed relatively easily within a few minutes, so you can peel it off and spray it again. Even after applying this product, it is easy to peel off for about one day, so dry it firmly. If you want to fix it quickly, use a blow dryer to heat the wheel.
User rating: *According to the experience of sticking on various motorcycles many times, this product comes with 8 strips of tape on a single sheet, but before you apply it, carefully cut each mat and peel it off a little bit and stick the edge to the wheel rim, decide the overall position, then peel off the backing and stick it to the edge of the wheel rim, then peel off a little bit at a time. For PCX, place the position around the flat part of the wheel rim (after washing with a part cleaner, etc.), if the overlap is about 0.4 inches (10 mm), 4 pieces are just fine. The front tire can also be easily installed using a roller stand, and if the first person is the easiest to apply the right front wheel, you may need to practice here and put the right rear wheel that is the hardest to stick to. The day it was cloudy rains, so you cant see it reflected in 7 different colors, but when exposed to the light, there is almost no other appearance that shines in 7 colors irregularly. *We wanted to personalize your car in style. It is easy to apply to the wheels and it was even a clumsy I had to install it easily. The mirror type changes to a variety of colors depending on how the light hits them. It is perfect for your friends as well.