1. Material: (Heating Sheet) composite fiber heating wire + black non-woven fabric, L bracket) stainless steel
2. Cord length: 120cm
3. Input Voltage: DC12V
4. Power: About 20-30W
5. Handle temperature: 40°, 50°, 60°
6. Installation method: 3M adhesive fixed, fixed L-bracket lens holder
7. Net Weight: 83g
8. Accessories: Tape x 1, 3M adhesive x 2, rear view mirror bracket x 1, cable tie x 3, 1.
Long press for 3 seconds to turn on the device: How to use the switch 9. The red breathing light is on. When it reaches a certain temperature, it will automatically turn blue. Press to change the temperature of blue light at medium temperature. Press red at least 3 speeds, press 3 times for high temperature and long press off for 3 seconds, automatically turn off after 2 hours of standby, no need to worry about virtual power consumption.
10. Waterproof and flame retardant, more uniform and stable heating, more comfortable feel
11. Built-in intelligent temperature control chip, three level temperature adjustment, intelligent temperature control is more safe.
12 fast heating in 10 seconds, large heating area
13. Product has added standby mode. After switching to standby mode, the electric heating handle automatically adjusts to approximately 122°F (50°C) and automatically shut down after 2 hours. You forget to turn the switch off, so you no longer have to worry about drain out your motorcycle battery.
Instructions:
1. Power on: Red light, Blue light, Green light, each flash will come out next.
2. Standby: state flashing red light breathing, the temperature will automatically change to blue light mid-range after 2 hours of automatic shutdown.
Transition to standby mode or shutdown: 4. Press to hold key for 3 seconds
5. on key : Switch Gear
Wiring Method:
1. Connect to the motorized door lock (behind the key) of a motorcycle, the red line is connected to the positive output line of the electric door lock, and the black wire is connected to any negative or ground on the car. [This method is suitable for people who want to use standby but not forgotten. Switch on/off toasting
Connect to the positive and negative position of the battery 2. Red battery is connected to the positive pole, black is connected to the battery negative pole. With this electric heater handle, you dont have to worry about battery running out of battery (it is recommended for standby mode and even if you forget to turn it off in standby mode)