This is a set model with one control small amplifier head, BJF-S66 and dedicated foot switch FS-P3S.
■ BJF-S66
We are here to restore your beloved amplifier.
One Control First Amplifier
The One Control BJF-S66 is a small, lightweight, and high-power amplifier head that can easily handle the best sound from the 1966 American "Super" combo amplifier that can be used on the stage, studio or home.
Sound is exceptional when the vintage vacuum tube amplifier is output loud. But the best sound is very tricky.
The large output tones vibrate the floor and ceiling and have limited places to play. Larger and heavier amplifiers are difficult to carry and are more delicate and require fine maintenance.
The BJF-S66 is the sound of an American Combo Amplifier. From the loud new state output to the sounds that the components change over time and became called "Vintage" this amplifier head can easily create the best "Twangy" tone at any time.
The analog, solid state preamp section allows you to choose between two channels of Lead/Rhythm and lead channel provides gain up with lead drive control.
Specifications:
Input Impedance: 1MΩ
Output: 30W/16Ω, 66W/8Ω, 100W/4Ω
Equipped with an effect loop that can be turned on and off with a foot switch.
Rhythm / Lead channel common EQ
BASS 70Hz + -20dB
MID 450Hz + - 10dB
Treble 2 KHz + -20 dB
BRIGHT Switch: +10dB at 4KHz
Channel switching via foot switch.
Rhythm Channels: GAIN, MASTER, REVERB LEVEL, REVERB DECAY
Lead Channel: GAIN, LEAD DRIVE, MASTER, REVERB LEVEL, REVERB DECAY
Tremolo Effect: Supports on/off by foot switch, DEPTH and SPEED control
Size: W 10.4 x D 3.7 x H 3.3 inches (26.5 x 9.5 x 8.5 cm) (not including protrusions).
W 10.4 x D 4.6 x H 4.1 inches (26.5 x 11.8 x 10.3 cm) (when handle is folded)
Weight: 3.5 lbs (1.62 kg).
■ FS-P3S
One Control FS-P3S is a foot switch that connects directly to one control BJF-S series amplifiers.
Use the included dedicated cable to connect to the BJF-S series foot switch terminal.
You can switch the effect loop on the feet, switch the amplifier channels, and the effects on and off.
You can check the current settings with the foot switch LED without connecting a separate power source.
Size (W x D x H): 4.3 x 2.3 x 2.3 inches (11.0 x 5.9 x 5.8 cm) including protrusions.
Weight: 12.5 oz (366
Cable Included: 9.8 ft (3 m)
Depending on the arrival and production time, the design, specifications/specifications, and accessories may change without prior notice. Please be aware of
For details, please refer to the manufacturers website or the official import agency.