Feature

●Compatible models: 09 address V125/G (compatible with O2 sensors), CF4EA compatible. *Does not fit CF46A/CF4MA ●Fits years: 2010-2013
●Product Description: Silencer Shaft Length: 3.5 inches (90 mm) x 11.8 inches (300 mm) (SUS304 0.6 t ultra lightweight stainless steel); Total Length: Approx. 16.2 inches (410 mm); Exlets: 304 1.2 t; Lightweight Stainless Steel, 25 φ to 34 φ 42.7 φ φ φ φ φ φ φ φ φ φ φ φ to 50.8 φ (insertion part) The 25 φ part is 1.5 t to maintain strength. The flange part is steel plated. The 2-piece construction of the Excie Silencer end. The silencer end comes standard with an end baffle. *The necessary bolts, nuts, stays, and bands are included. Unprocessed bolt-on installation. Instructions are not included to reduce costs. Please reuse normal gaskets or purchase a new one
●Accessories: Silencer x 1, Empie x 1, Dedicated stay x 1, Silencer band x 2, M10 x 50 mm flange bolt x 2, M8 x 45 mm flange bolt x 2, M8 nuts x 2, Spring x 2
●Note: All of our products are certified to meet safety standards, but not government certification tests. For muffler sounds, the volume is made slightly larger than the original ones. In addition, the sound quality may vary depending on the condition of the vehicle and how you are driving. The muffler may vary depending on the conditions of use, but if used for a long time, the silencer internal silencer may deteriorate and the volume may increase, so please replace the sound dampening material. Replace silencers with a new silencer that cannot be replaced with silencers. Regarding the gasket, please continue to use the original factory gasket when installing this product. Also, though we do not sell gaskets in our store, so please understand that when making your purchase please prepare it separately

Description

Precautions for Installation and Use:

Please be sure to install and read before handling.

Thank you for purchasing our products.

In order to ensure that you can use it for a long time, please read the following information carefully and adhere to it.

Before installing the product, please check the product description and the included product content, and make sure it is correct and correct before installation.In addition, installation should be strictly observed by certified mechanics in line with service manuals issued by the car manufacturer.

The product is installed and handled correctly according to the purpose of the intended purpose.

·It must be strictly adhered to the Road Transport Law and Road Transport Vehicle Act.

·Always check before operation and maintain maintenance.

Mounting bolts and nuts may loosen due to vehicle vibration, so even when using screw lock agent is applied, please check and strictly follow the tightening process.

This part improves exhaust efficiency and improves performance.Please be sure to maintain sufficient maintenance such as the car body, foot circumference, brake performance, etc.

Our products are developed with normal engines and normal vehicles so we cannot be responsible for any damages caused by modifications or tuning of the engine, car body, or drive system.Also, please note that we cannot be responsible for any damage due to the use of parts other than our accessories and improper installation of screws or washers other than our factory condition.

Please note that depending on the car model, the bolts and nuts that used the normal muffler may be used.

If you send the product to us due to damage or repair of scarves, we cannot accept replacement of the scarf, so please make sure that your normal scarf should be kept without disposal.

Our products are developed for competitive use, so please understand that we cannot compensate for failure.In addition, we cannot be responsible for any violation of road traffic laws, violation of road transportation laws, or accidents, etc.

We are not responsible for any issues other than the quality of our products.

·We strictly refuse from those other than defective products.Also, after installation, we will not refuse the spinking if the engine has been started.

When the engine is turned on, the muffler will be very hot.Please be careful as it may burn burns or burn clothes.In addition, when parked after driving, there is a risk of fire if it is on a flammable object such as withers, etc., be sure to check under the vehicle before parking.

Exhaust gas contains toxic gases.Always stop the engine when there is someone behind or where it is locked out.

·There may be a sound (afterfires) of a pan when throttle off while driving or immediately after the engine is stopped. This is not an abnormal phenomenon.

Our products are 126 - 4.9 fl oz (50 cc) (less than 84 db) (less than 125 cc) (less than 90 db)

Although this product is made up of 250cc (less than 94db) (250cc), please note that this is not limited to the individual differences in the vehicle itself.Also, do not remove the baffle when driving.

The muffler may vary depending on the conditions of use, but if used for a long time, the silencer internal silencer may deteriorate and the volume may increase, so please replace the sound dampening material.Replace silencers with a new silencer that cannot be replaced with silencers.

Protect your manner and drive safely, and be sure to protect and ride with traffic rules without sudden acceleration or airstroke.

·If any abnormalities occur while driving, please immediately stop the vehicle in a safe location and inspect any abnormalities.In addition, even if you do not see any abnormalities in appearance, please be sure to observe a mechanic who has a professional knowledge.

Please be aware of the above before reading the above information.

If you have any questions, please contact the seller or the manufacturer.

Product information