Feature

●The protector base uses 35mm rail type or device type and has two internal screw hole structures that can be installed individually or directly on the HT35 rails
●Normal, defective) voltage triphase imbalanced, and displays with 3 indicators in reverse phase
●Failure protection means that when the protected circuit is in working or non-working state, the delay is 2 seconds
●Reverse phase protection is a protective measure to prevent misconnection of the three phase AC phase sequence of L1, L2, and L3 and delay the 2S operation
●Voltage imbalance protection It refers to protective measures affecting the safe operation of the power line due to imbalances of the three-phase voltage


Description

Specifications:
Rated Voltage: 200-500VAC, 50/60Hz
Protection: Phase and Phase
Display mode: LED display operating status
Contact Form: Set of 2 Constant Close Contacts
Contact Capacity: 6A AC250V (Resistor)
Installation Method: 35mm Rail or Device
Size: Approx. 79 x 23 x 79mm / 3.1 x 0.9 x 3.1in

Package List:
1 x Protector

WARNING:
This product is usually a sample product. Install on the power side of the 3-phase power supply. Do not install on the output side of the variable current.