Built-in speaker simulation is an integral part of the CLASSIC series circuit. Each model is tuned to match the speaker/cabinet of the amplifier. Designed to provide smooth and uniform response like a multi-mic cabinet with no mountains, valleys or cutouts associated with a single microphone. Speaker curve shape does not require disable speaker simulation circuits when used with guitar amplifiers. Speaker simulation works in conjunction with the EQ to custom tune the overall sound.
Features
Classic M-SHALL based on Tech21 SansAmp CharacterBritish
Suitable for guitar, bass and other electric acoustic products.
Adjust the level of guide unit output This has a very wide range for maximum compatibility with a variety of devices.
The Post-EQ sections on the LOW, HIGH, MID onboard allow complete control of the studio mixing board as your fingertips. Unlike passive tones that are just cut, these active will cut and boost by cutting ±12dB. Low is adjusted to 125Hz. High frequency is 3.2kHz. The Mid is custom tailored for each model.
Adjust the overall amount of gain and overdrive as you are pushing the output portion of your DRIVE vacuum tube amplifier. The first half of the rotation increases not only the overdrive but also the volume.
Voice * Different sound for each pedal in the series Eliminates the possibility of various tone associated with each style of amplifiers. In addition to changes in frequency response, Voice also affects attacks and drive characteristics for each specific amplifier style, you may need to adjust gain and tone settings after adjusting Voice.
Specifications
Model Classic M-SHALL
Material: Metal
Color: Black.
Power Supply: DC 9V 100mA, Center Negative
Input Impedance: 1MΩ
Output impedance: 1KΩ
Item size approx. 4.53 x 2.56 x 2.17 inches (115 x 65 x 55 mm).
Item weight approx. 262g / 9.24oz
Package size approx. 5.39 x 3.03 x 2.64 inches (13.7 x 7.7 x 6.7 cm).
Package weight approx. 312g / 11.01oz
Package Contents
1 x Guitar Effect Pedal.