Feature(may vary by option.)
●This type of attracting fan is used in household chimney/fireplaces, and the outlet temperature should not exceed 80 degrees. Please keep the induction blower at least 6 meters from the source of fire. Otherwise, the induction blower will burn
●This chimney fan is very suitable for chimney accessories. The chimney induction blower generates suction and rapidly releases the smoke to prevent the smoke from escaping smoothly due to chimney failure. Not only does the smoke discharge fast, but it also performs well
●NOTE! 60W chimney fan for flue diameter 9-17cm 120W chimney fan for 19-26cm flue diameter The input voltage is 220v (equipped with 110V-120V voltage, voltage converter). The chimney vent fan is used for: Leaves two ends of the wire to connect to the power supply
●Easy to install, very quiet, suitable for most forms of chimney, no professional technicians required for installation
●To prevent electric shock, please turn off the power switch when installing or removing it
[60W]
[120w]
Description
Specifications:
Weight: 6.6 lbs (3
Voltage: 110V (USA), 220V (EU)
Power: 60W/120W
Package: 1 * Induction Fan
Please note:
1. Please turn off the power switch when installing or removing to avoid electric shock.
2.Interface to smoke outlet must be fixed with waterproof insulating tape.
3. For best results, the chimney should be firmly installed at the boundary of the chimney and the boundary must be fully integrated into the chimney.
4. If the Attractor is stopped, please be aware that the smoke will escape and backflow.
5. The chimney outlet is located on the top of the chimney. The smoke outlet must be more than 6 meters away from the source of fire. Otherwise, the Attractor Vent Fan will burn. The temperature of the fireplace will not burn the insulating layer of the power cord.