Feature(may vary by option.)
●Perfect for chimney accessories. The draft fan caused by the chimney, produces suction and causes rapid emissions of smoke to prevent the chimney from being poorly and the chimney is not able to get the chimney
●* 80W chimney fan for chimney diameter 13.5-21cm, 120W chimney fan for chimney diameter 19-25.5cm
●* Chimney fan is used when the flue gas temperature is not over 575°F for intermittent operation and 482°F for continuous operation. Otherwise, the induced draft fan will burn
●*Note - The operating voltage of the product is 220V (110V-120V voltage, equipped with a voltage converter) and use the chimney induction draft fan leaving both ends of the wire to connect to the power supply
●* Easy to install, very quiet, suitable for most types of chimney, no professional technicians need to install. Not only does the smoke discharge quickly, but it also performs well
[100w]
[120w]
[80W]
Description
Solve the smoke problem
Electric electric fan draft helps to vent fireplace, pizza oven, and wood stoves
These fans are specifically designed for applications where efficient operation, low energy consumption, variable speed, and compact design are most important.
These fans need to be installed at the end of a solid fuel chimney or stack system and can be attached to a masonry or metal chimney.
Chimney fans should not exceed 575°F for intermittent operation and 482°F for continuous operation.
Specifications:
Product Name: Electric Draft Induction Fan
Voltage: 190-240V
Delivery range: 1 x induction draft fan
Installation Method: Very easy: install the inductive draft fan in the chimney outlet, wire the cable in the right place of the room and connect to a single 220V power supply. (To prevent electric shock, please turn off the device when installing or removing it. )
Note:
1. To avoid electric shock, please turn off the power switch when installing or removing it.
2. The interface to the smoke outlet must be fixed with waterproof insulating tape.
3. The interface with the chimney should be solid, and the interface must be fully integrated into the chimney for best effect.