Specifications:
Item Type: Electric Drilling Dust Collector.
Weight: 531.00g / 18.73oz
Material: ABS.
Battery Type: Lithium battery (Shipped by built-in battery)
> Battery Capacity: 1800mAh
Noise Level: ≤ 60DB
Laser Output: 1 mw
Operating Pressure: -55 Kpa
Operating Temperature: -4 to 154°F (-20 to 70°C).
Protection Level: IP54
Laser Wavelength: 650nm
Product Size: Approx. 190x77x52mm / 7.5x3.0x2.0in
How to use:
1. Turn on the suction button. When this happens, you will hear the sound of the motor. The battery indicator light on the left side is on. At this time, the suction success is achieved by pressing the dust collector firmly against the suction surface. When suction is successful, the air pressure monitoring indicator light on the right side will light up. If you hear a "pe" or "pe" sound, there is no air pressure and need to be re-attached. This is normal adsorption.
Packing List:
1 x Dust Collector
1 x paste
1 x Bracket
1 x Screw
1 x USB Data Cable
1 x English Instruction
Note:
Comes with built-in battery