Feature

●To install, simply unscrew the screw on the back of the effector and replace the original plate with this underplate. The use of this plate allows for a smart and secure effect board and will not damage the rubber or print information as opposed to direct Velcro rubber adhesion to the rubber and the print information so it wont lose the value of the effector
●This plate is made from 3.5mm aluminum and has been recessed to prevent the screws from popping out even when the plate is installed so that the screws do not interfere with the effect board
●In addition, this underplate is designed to fit older models and the AC adapter connectors and plates are designed to prevent interfering with older products, so it can be used by a wide range of users
●The robust aluminum material can withstand the weight of the pedal while still being lightweight at 66g and will not increase the overall weight of the effector
●The surface of the panel is hairlined to ensure the beauty and conductivity


Description

BOSS Compact Effectors have rubber underneath to prevent slipping when placed on the floor. However, this rubber material is difficult to apply when fastened with Velcro to the effect board and may damage the center impression when removed. Therefore, you can lay the bottom flat and attach the velcro (velcro) to make sure the installation on the effect board. Please prepare Velcro strips (velcro) for commercially available products. Original GBD MUSIC Product.