Feature

●There are two different polishing discs positioned: white hard ball sand sanding discs, mainly used for polishing wet foods and polishing rice paste, never rust. It can also be used to polish the five-grain grain, making it delicate and uniform. The second is a steel polishing disc, but it is used to polish dry foods and is primarily used for polishing powder, making the finished powder delicate and convenient to remove
●Power for this electric corn grinder : 1500W; Voltage: 100-120V/50-60Hz Common Rated Speed: 1400r/min; Drill Diameter: 150mm; Weight: 23kg Rotation Direction: Counterclockwise; Production Efficiency: Corn ≤60kg/h; US ≦75kg/h; Wheel≤75kg/h; Potty rice ≤50kg/h; Soy ≤50kg/h; Rice 50kg/h Tips: The steel polishing disc is used to grind powder, but not for polishing wet foods
●Wet/Dry Grain Grinder: Can grind both dry and wet foods with excellent polishing effect. The texture is fine and can be freely adjusted according to your needs. You can grind wheat, rice, corn, coryan, soybean, and rice to dry flour. In particular, it can polish soy or rice that has been submerged in water into the paste
●With a clean brush, you can easily clean the remaining powder in the can and then wipe the inside of the can with a dry cloth. Just turn on the power and use, it is very easy to operate. Widely used in homes, hotels, restaurants, canteens, grain processing plants, pharmaceuticals, and other industries. Can be used for soy milk, New Year mochi, etc
●5. Commercial grinder and paste grinder is more efficient than the traditional grinder model MFS150, and the large power electric can be rotated at high speed, its thickness can be adjusted, and the diameter of the thinnest polisher is 80 instructions are included


Description

Features:
This electric corn grinder has 2 different polishing discs: white hard ball sand sanding discs, primarily used for polishing wet foods and polishing rice paste, will not rust. It can also be used to polish the five-grain grain, making it delicate and uniform. The second is a steel polishing disc, but it is used to polish dry ingredients, primarily for polishing powder, and the finished powder is delicate, convenient to remove and clean. Tips: The steel polishing disc is used to grind powder, but not for polishing wet foods. Grinding the grind (use steel polishing disc) polish the grind at least twice, first grind the material and the method is the same as mentioned above. Then turn the adjustment dial clockwise and lock the upward adjustment dial counterclockwise. Do not touch the two dials inside.
It is intended to ensure that the electrical unit does not overload. When polishing fine powder, you should not put too much ingredients, otherwise it may overload the electronics, but the amount of material is controlled by the insert. Replace the sand sanding sheet, place the included bucket in a high position, start the motor, and then drain out water, when water comes out from the outlet, then slowly insert the ingredients to polish the paste. Caution: The axle between the commercial steel polishing sheet and polishing pieces is made of cast iron with consideration for the requirement of hardness. After use, it can be dried and applied with edible oil to prevent rust.

Installation:
Just install the stepladder and funnel stand after receiving the machine. The black four foot mats are designed to be placed at the bottom of the leg to prevent the machine from slipping. Firstly, install the ladder, 4 long screws and 4 nuts are used to attach to the ladder to secure the body. The 5 short screws are attached to the white funnel fittings (one short screw in one is for securing the platform, and by tightening the screw, releasing the screws can slowly extract the insert, but the insert is primarily used to adjust the amount of material or the food out and adjust the speed of the ingredients. Finally, insert the funnel into the funnel fitting and install it completely.)
Production efficiency: Corn ≤60kg/h; US ≤75kg/h; wheat ≤75kg/h Potty rice ≤50kg/h; Soy ≤50kg/h; Rice 50kg/h
The entire process of fast grinding is done in an airtight tank, so the amount of heat is generated. So it is normal that the machine gets a little hot.