Feature

●For drilling holes in siding (kiln and metal types), ALC (rebars), blocks, mortar, wood (with nails), 2 x 4 materials, etc
●Electric Motors: Electric drill, vibration drill, SDS lightweight hammer drill (rotation mode)
●The newly developed multi-blade type allows for drilling holes in a wide range of materials such as siding (kiln and metal types), ALC (with rebars), deck plates, thin steel plates, 0.05 inch (1.2 mm) or less), blocks, mortar, wood, etc
●The use of a PAT.P wide chip makes it easy to remove shavings
●● "Scratching Pong! Center drill" is a non-vis-locking mechanism that allows removal of debris without disassembling the core drill body
●The newly developed radian one shank system makes it easy to replace the core body of other sizes
●Aluminum die cast at the bottom of the core. (55 φ and above) The lighter 2/3 of the previous model improves workability


Description

Note: Please use the electric motor with a forward rotation.
Make sure the product is suitable for your material.
Please do work with the number of revolutions and feed appropriate for the product and the material used.
Please do not remove or remove each part of the product, such as a center drill or center pin, with bare hands.
Please do not use bare hands to remove the pieces or scratches.
Please make sure each part of the product is locked tightly before working or during installation. (Even in new shipping, there may be loose parts in order to facilitate exchange by selecting specifications such as shanks and spindles. )
Keep out of reach of children.

WARNING: Do not use the instruction manual and anyone who cant understand the contents of the warning or label. In addition, when you rent an outlet, please rent it with an instruction manual (English language not guaranteed).
Please follow the instructions for handling your electric motor according to the instruction manual on the motor.
Wear protective glasses.
Wear a mask.
Do not work with pants hem or garment sleeves spread out.
Please remove the tie or washcloth that is wrapped around the neck for work.
Wear a hat or hair cover for long hair.
Do not wear gloves.
Do not touch the product while rotating.
Do not remove any cutting pieces or claws while rotating the product.
Keep your motor securely in both hands.
Keep your feet firm and in balance.
Drill holes straight against the object.
Please do not use if you do not have strength to hold the motor.
Please use the electric motor with a clutch.
Wear a protective hat.
Do not use on electric motors with brakes or brakes. (There is a danger of breaking down the material and surrounding damage or injuries during work. )
Only use in rotation mode for rotation. (When using the Z-axis spindle (SDS type), please use in rotation mode. Hammer mode is not available. )
Do not use products for rotational or vibrating in striking (impact) mode. (When using the Z-axis spindle (SDS type), please use in rotation mode. Hammer mode is not available. )
Please make sure each part is locked tightly to avoid loosening before use. (There is a danger of breaking down the material and surrounding damage or injuries during work. )
Please do not use this product thoroughly before using and if there is any damage or looseness, etc. (There is a danger of breaking down the material and surrounding damage or injuries during work. )
Please install the safety cover of the machine and the material anti-rebound device properly. (For chip saw or diamond cutter)
Please use the installed power supply of the circuit breaker to prevent electric shock. (with water)
Wear rubber boots or rubber gloves. (with water)
Wear a safety belt when working in high places.
Take a precaution to prevent the cut from falling off.
Limit the entry of a third party to your work site.

The images are for illustration purposes only, please check the product description ※