Feature

●[Module Description] The ITEAD PN532 NFC module is based on the PN532 chip and is used for 13.56MHz near-range radio communication. Operating Voltage: 3.3V Maximum effective transmission distance is 3cm
●Communication Mode: The module supports three communication modes: SPI, serial, and I2C communication. Meets ISO14443 Type A and Type B standards
●Easy to use: When using it, simply dial the two DIP switches to set the communication method. The module is equipped with an on-board antenna, so no external antenna coil is required
●Uses: Arduino compatible, Raspberry PI compatible, this kit allows you to DIY various interesting experiments, such as access control experiments
●[Package Included] PN532 NFC Precision RFID IC Card Reader Module x 1, White Card x 3, Key Card x 3


Description

Description:
The PN532 NFC module using the PN532 chip is for 13.56MHz near-field communication. The module is equipped with an on-board antenna, so no external antenna coil is required. Compatible with SPI, IIC, and UART interfaces for communication. When in use, simply shake the two DIP switches to set the communication method. This kit can be used to do a variety of interesting experiments, including access control experiments.

Specifications:
IC: NXP PN532
Operating Voltage: 3.3V
Power supply voltage: 3.3~5.5V
Maximum Supply Current: 150mA
Operating current (standby mode): 100mA
Working current (write mode): 120mA
Working current (read mode): 120mA
Interface: SPI interface, Std Raspberry Pi 20pins interface
Product size: 79 x 49mm / 3.1 x 1.91in

Features:
1. Maximum effective transmission distance 3cm
2.Support SPI, IIC, UART interface switching.
3. Can be used for 13.56M contactless communication
4.ISO14443 Type A and Type B Standard

Package Includes:
1 x PN532 NFC Precision RFID IC Card Reader Module
3 x white cards
3 x key cards.