[1 piece for 30° fine print]
This cutter is suitable for cutting thick sheets such as fluorescent and reflective sheets. (The Steca series cannot be adjusted to the cut pressure, so it is slightly different than regular sheets. The offset value is 0.01 inch (0.25 mm), so it can be used in the Steca series. Specifications: Cutting cutter (replacement blade), for fluorescent and reflective sheet, offset: 0.25 m, 1 piece; Compatible with: STIKA series (SV-15, SV-12, SV-8, SX-15, SX-12, SX-8, STX-7, STX-8) CAMM-1 series (GX-500, GX-400, GX-24) VersaCAMM series (VS-64) 0, VP-54 0i, VP-300, VP-300i, SP-540V, SP-540i, SP-540VS, SP-300V, SP-300i, SP-300VS, SP-300S, SP-300W) ColorCAMM(PC-12)
Roland DG products can be used with the cutter holder in the general use of XD-CH2 and XD-CH3. (Steca, CAMM-1, VersaCAMM, etc.). Please make sure your holder is the model number or compatible product before purchasing. This is not an original product. The offset value is 0.25mm the same as the standard. When replacing the blade, be sure to clean and refuel the inside of the holder and make sure to adjust the blade output