[5) RST Series (Koshi)]
[4) DC Series (RACING)]
[2) SP series (Town EX)]
[1) HS Series (Town EX)]
SBS brake pads are the greatest appeal of control and abrasion resistance!
SBS brake pads are made of 3 layers. It is the technology you need to perform at the highest level of stability in extreme conditions.
Brake lining material
The special technology "Ultrasonic UCT" is effectively used to blend each material.
Fiber ceramic
Fiber ceramic is sandwiched between the steel back plate and the lining material to reduce heat transfer and provide exceptional fade resistance.
It shuts out moisture, so it reduces corrosion on the backplate.
Steel back plate
Molded with up to 22 tons of pressure, the furnace is applied for 3 hours of heat up to 900 degrees Celsius and crimped back plate.
■ The secret of high quality is the special blend technology "Ultrasonic UCT".
SBS vehicle patented technology that allows for a balanced and perfect blend of components using ultrasonic waves.
[HS/LS type] … Street Excel
This pad is designed for road sports and street driving. Symmetric
HS: Front, LS: Rear
■Compatible Models
Ducati (Front) 800 HYPERMOTARD 2013-2015 | 800 HYPERMOTARD SP 2013-2015 | 800 HYPERSTRADA 2013-2015 | 800 SCRAMBLER CLASSIC 2015 800 SCRAMBLER ENDURO 2015
800 SCRAMBLER FULL THROTTLE 2015~ | 800 SCRAMBLER ICON 2015~ | 800 PRO 2016~ 800 ENDURO 2016~ | 821 MONSTER 2015~ | 821 MONSTER DARK 2015 ~ | 899 PANIGALE 2014-2015
939 HYPERMOTARD 2016 | 939 HYPERMOTARD SP 2016 | 939 HYPERSTRADA 2016 | 959 PANIGALE 2016 | 1200 MULTISTRADA ENDURO 2016 | 1200 STRADA STRADA 015 - | 1200 MONSTER 2014
APRIRIA (FRONT) RSV1000 TUONO V4 R 2014 | RSV 1100 TUONO V4 2015 ~ RSV 1100 TUONO V4 FACTORY 2016 | RSV 1100 TUONO V4 RR 201 5+ | 1200 CAPONORD 2013 | 1200 CAPONORD RALLY 2015
Brake caliper may be replaced depending on the production lot, so please check the actual product before purchasing.
BMW (Front) F800R 2015-| S1000 XR 2015 ~ R1200GS 2013-2014 | R1200 NINE-T 2014 | R1200R 2015 ~ | R1200 RT 2014 Year | R1200 R/RS 2015 -
Brake caliper may be replaced depending on the production lot, so please check the actual product before purchasing.
SBS brake pads cannot be used for other than motorcycles.
Installation procedures should be done in accordance with the motorcycle manufacturers maintenance manual and certified maintenance factories or qualified mechanics.
If the lining material wears less than 0.08 inch (2 mm), it is necessary to replace it with a new one.
For double disc vehicles, please replace brake pads on both sides of the caliper at the same time.
Please do not use this product as circuit running with a ceramic pad for street use exceeds the frame of usage conditions.
When running on a circuit, please always use a racing pad that meets the conditions of use or Street Excel.
Brake pads require break-in to use.
In order to get sufficient impact with the rotor after replacing the pad, please do not use extremely strong braking, unless in case of danger avoidance until the first 150 times