Feature

●Genuine Shimano Reel Custom Parts


Description

Genuine line roller with built-in bearings.

11

Please use as a spare part for maintenance purposes.

Shimano line rollers are equipped with a core protection function, so the line roller body and line roller bearings are integrated into one piece, so they cannot be disassembled.For this reason, if the bearing wears out and you want to replace it, you will need to replace each line roller.Also bearings cannot be added.Quantity: 1

■Compatible models

21 twin power XD.

(C3000HG, C3000XG, 4000PG, 4000HG, 4000XG, C5000XG)

20 twin power

(C2000S, C2000SHG, 2500S, 2500SHG, C3000, C3000MHG, C3000XG, 3000MHG, 4000, 4000PG, 4000MHG, 4000XG, C500XG)

17 twin power XD.

(C3000HG, C3000XG, 4000XG, C5000XG)

21 Exsense.

(C3000MHG, C3000M, 3000MHG, 4000MXG)

18 Stradic SW

( 4000HG, 4000XG, 5000XG, 5000PG )

19 Vanquish

( 1000SSSPG, C2000S, C2000SSS, C2000SHG, C2500SHG, C2500SXG, 2500S, 2500SHG, C3000SDH, C3000SDHHG, C3000MHG, C300XG, 3000XG, MHG, 3000XG, MHG, G, 4000 MHG, 4000XG, C5000HG, C5000XG )

All replacement of the original line rollers are similar in structure, so we will explain 14 Stella as an example.

■Installation method

33

44

55

66

All replacement of the original line rollers are similar in structure, so we will explain 14 Stella as an example.

First, remove the bolts that hold the line roller.

Depending on the condition of the reel, there may be some adhesion, so please be careful not to crush the threads when removing it.

Note:

Depending on the type of reel, the threads may be minus and torque.Make sure you have the right screwdriver for your reel.

Remove the screws to remove a total of 6 parts.

We will replace the line roller with a brand new one.

77

88

99

1010

After replacing the new line roller, we will put the parts in order of the numbers above.

Install (1) parts first. This part is oriented to be mounted, so please make sure to install it correctly according to the shape.

After installation, hold the (1) part with your finger until you finish working.

Please note that if the parts are loosened and the parts are moved, they cannot be installed correctly.

Install (2) parts.

1111

1212

1313

1414

Install (3) Line Roller Body

For line rollers installation.

If you look at the side of the line roller, you will notice that the width of each side of the groove is different.Install the narrow one on the bail and the wider side toward the fixed bolt.

Install (4) parts.

1515

1616

1717

Install (5) plates.

Lift the arm and insert the (1) tip neatly and bolt it into place.

If you have no problems, you will be done.

Finally, make sure the parts are installed properly and the line roller that you installed will rotate properly.