Feature

●You can drill a hole in the middle without slipping. Set of 8 Drill Bits for Center Extraction
●This drill bit allows you to drill the screw holes necessary to install the most troublesome hinges and hardware installation for doors and crates
●Simply select the thickness of the drill blade to match the thickness of the screw and press it straight into the countersunk screw hole for easy and accurate drilling
●From installing doors and doors such as doors, creating wooden boxes, cabinets, wood decks and furniture. A convenient item for DIY and DIY projects
●8 pcs drill bit set of 5/64, 7/64, 9/64, 11/64, 5mm, 13/64, 1/4 Please use the appropriate size according to the screw holes on the hinge Also included is a hex wrench to remove the guide


Description

Drill Bit, Countersunk Trap, Center Extractor, Woodworking, Screws, Bolts, Washers, Doors, Wooden Box, Cabinets, Clogs Box, Chamfering, Woodworking Chamfering, Countersunk Hole, Lower Hole, Perforation, Wood DeckDrill Bit, Countersunk Trap, Center Extractor, Woodworking, Screws, Bolts, Washers, Doors, Wooden Box, Cabinets, Clogs Box, Chamfering, Woodworking Chamfering, Countersunk Hole, Lower Hole, Perforation, Wood Deck

The most troublesome hinge installation for door and crate manufacturing

The holes are misaligned by putting the holes in the center of the screw hole.

When you hit the screw, it finally became oblique

This is a convenient product that will help you solve those problems.

Internal spring and pre-drilled blade

Press it vertically to the desired area and slide it to open to open it

Drill Bit, Countersunk Trap, Center Extractor, Woodworking, Screws, Bolts, Washers, Doors, Wooden Box, Cabinets, Clogs Box, Chamfering, Woodworking Chamfering, Countersunk Hole, Lower Hole, Perforation, Wood DeckDrill Bit, Countersunk Trap, Center Extractor, Woodworking, Screws, Bolts, Washers, Doors, Wooden Box, Cabinets, Clogs Box, Chamfering, Woodworking Chamfering, Countersunk Hole, Lower Hole, Perforation, Wood Deck

How to Use:

STEP1

Choose the blade thickness of the drill that matches the thickness of the screw.

STEP2

Press straight to the countersunk screw holes.

STEP3

Turn the switch on and push it in to complete the bottom hole.

[How to use] STEP1 Choose the blade thickness of the drill that matches the thickness of the screw. STEP2 Push straight into the countersunk screw hole. Step 3 switch and push it in to complete the holes.[How to use] STEP1 Choose the blade thickness of the drill that matches the thickness of the screw. STEP2 Push straight into the countersunk screw hole. Step 3 switch and push it in to complete the holes.

Product Details:

Material: High-speed steel; Size: Inserted hexagonal shaft diameter: 0.25 inches (6.35 mm).

5/64": Total length: Approx. 3.4 inches (86 mm), 0.08 - 0.1 inch (2.2 - 2.8 mm) self tapping screws for an opening diameter of approx. 0.08 inch (2.2 - 2.8 mm).

7/64": Total length: Approx. 3.5 inches (89 mm), approx. 0.1 - 0.1 inches (3 - 3.5 mm) self tapping screws, approx. 0.1 inches (2.8 mm) opening diameter.

9/64 inch (2 pieces): Total length: Approx. 3.8 inches (98 mm), approx. 0.2 - 0.2 inches (4 - 4.5 mm) self tapping screws with approx. 0.1 inch (3.5 mm) opening diameter.

11/64": Total length: Approx. 3.9 inches (99 mm), approx. 0.2 - 0.2 inches (5 - 5.5 mm) self tapping screws, approx. 0.2 inches (4.5 mm) opening diameter.

·0.2 inches (5 mm): Total length: Approx. 4.3 inches (109 mm), approx. 0.2 - 0.2 inches (5.5 - 6 mm) self tapping screws, approx. 0.2 inches (5 mm) opening diameter.

13/64": Total length: Approx. 4.3 inches (109 mm), approx. 0.2 - 0.2 inches (6 - 6.5 mm) self tapping screws, approx. 0.2 inches (5.2 mm) opening diameter.

1/4 inch: (Total length) about 4.5 inches (113 mm), approx. 0.25 - 0.39 inches (7 - 7.5 mm) self tapping screws with an opening diameter of approx. 0.25 inches (6.35 mm).