Perforated Board Hook Peg Board Peg Boad Hook (Special lock pin and hook set to prevent hooks from rattling or sideways from shifting, can be used for display fixtures, etc. L shape with straight hook for hanging or hanging deep objects Please check the pitch between holes, plate thickness, and hole diameter of the board you plan to install before purchasing. Compatible Hole Pitch: 1.0 inch (25 mm) only; Compatible Hole Diameter: 0.2 inch (5 mm) Compatible Peg (holes) Board Thickness: 0.2 inch (4 - 5.5 mm); Load Capacity: 2.2 lbs (1 kg); Contents: 5 hooks, 5 pins; Installation Method: Put the hook through the hook, then push into the appropriate hole with each pin. When attaching the compatible peg (perforated) board to a wall, do not stick to the surface, please leave the space for the hook at least 0.8 inches (2 cm) and ensure the assembly when inserting it. Cannot be installed with weight exceeding the allowable load and strength of the board. Please check the installation method before work, so as to avoid scratches on the board or wall. ■ Material: Hook/Iron (nickel plated), Lock Pin/Stainless Steel *Due to the nature of the material, there may be differences in color and hardness in the production lot. We cannot accept returns due to variations in color. Materials, surface treatment, and shape may change without prior notice.