Feature

●The Amazon points given for this item are granted to be combined and given to each individual item. Please check your order confirmation screen for the exact number of points
●Product (left): Country of Origin: China
●Product (left): Set Contents: Adjuster - 1 set, instruction manual (English language not guaranteed)
●Product (left): 2 x 4 materials (1.5 x 3.5 inches (38 x 89 mm)). *2 x 4 materials are not included. Please prepare separately
●Product (left): Material: Resin parts: ABS resin, synthetic rubber, screws: Iron, plated finish; Spring: Spring steel, plated finish
●Product (Right): Country of Origin: China
●Product (Right): Set Contents: 1 set of joints, 8 screws, instruction manual (English language not guaranteed)


Description

Heian Shindo LABRICO DXB-1 DIY Storage Parts 2 x 4 Adjuster Bronze
LABRICO Series DIY Product for rental renters.
Fashionable 2x4 material tension bracket that can be installed safely and easily by women and family.
No tools required! Simply turn the jack to secure the 2x4 material.
Even if you hit a vacuum cleaner, it wont fall over. This product is highly safe and developed by a veteran manufacturer who handles tension products.
Working Load:
If the load is applied to one side of the column, please use up to 44.1 lbs (20 kg).
It may fall over. (When using a shelfboard, it also includes the weight of the shelf. )
Working load is laboratory value. The conditions may vary depending on the location of the installation and the wood used.
Precautions for Use:
This product is for indoor use. Do not use in places that are exposed to direct sunlight, high temperatures, or in places with high humidity, such as bathrooms.
Please do not place dangerous items, valuables, or items that may be damaged.
Do not crank or hang
The adhesion of deodorizers, air fresheners, cosmetics, hair stylists, acid detergents, alkaline detergents, oils and organic solvents (benzine, thinner, etc.) may cause degradation. Remove it immediately.
Please do not paint this product.
This product is for vertical tension only. Do not use horizontally.
If any abnormalities such as damage or cracking, please discontinue use immediately.
We cannot accept compensation for unavoidable forces such as celestial disasters, deterioration, modification, faulty or accidents due to incorrect use.
Products brought outside of Japan are not subject to compensation.
Precautions before Installation
This product is intended to be used on commercial 2 x 4 materials (1.5 x 3.5 inches (38 x 89 mm)), and the poles are made to be stretched on the floor and ceiling, without screws or nails.
Prepare 2 x 4 materials that are 3.7 inches (95 mm) shorter from the ceiling height.
Please install it in a sturdy place on the underground. Installation in a weak place may cause falling, or damage to the ceiling.
Do not install on sloped ceilings or floors. This may cause falling.
Please install it vertically. If installed at an angle it may cause it to fall over.
Mounting dimensions should be height up to 108 inches (2750 mm).
This product is for vertical tension only. Do not use horizontally.

Heian Shindo DXB-4 LABRICO DIY Storage Parts 2 x 4 Joint Bronze
LABRICO Series
DIY product for renters.
Fashionable 2x4 material joint, safe and easy to install, even for women and family members.
Easily joins 2 x 4 materials. Carry two pieces of wood that were too long to go out, or use the extra wood