Feature

●2.54mm Jumper Cap - Line Pin Jumper Caps, 2.54mm Spacing, Commonly used on single chip and electronic circuits to shorten the two adjacent pins. Plugs directly into a row of pins
●Black Jumper Caps - These are two pin jumpers (also called shants) that create an electrical connection of 2.54 mm (0.1 inch) male pin header
●Jumper Caps -- Use:Standard 2.54mm jumper caps for use with hard drives, circuit boards, computer interface cards, etc
●Circuit Board Jumper Cap -- Strict quality inspection system ensures that the product is available
●Pcb Short Circuit Cap - Made of material, durable and long lasting


Description

Package contains
1000 x Jumper Caps Included


Features
- Material: plastic, copper circuit board jumper cap
- Color: Black Short Connecting Block
- Size: 0.60x0.50x0.20cm/0.24x0.20x0.08" Shunt Short Circuit Connector
- If the jumper is fixed on the two jumper pins, the jumper will turn on and the current will flow. We call this short-circuit.
- Conversely, do not tighten the jumper cap. This means the short 2.54mm connection block has been disconnected.
- The motherboard jumper is a manual switch on the motherboard. You can change the PCB short circuit cap of the motherboard circuit through the jumper connected to another jumper pin.
PCB Jumper
- The jumper cap is an active part, the outer layer is insulated plastic, and the internal conductive material can be inserted into the jumper pin on the circuit board shunt connected to two jumper pins.
- The most common motherboard jumper is mainly 2 pieces, one is only 2 needles, the other is the short connection block of jumper cap PCB.

Product Information
PCB short connection blocks optimize system configuration with standard jumper caps. Circuit Board Shunt Jumper Caps are similar to a switch circuit board that can be used for several configurations to change circuit boards. 2.54 mm short circuit caps. These are used to control the motherboard configuration of internal devices.