You can remove the annoying constant power source, ACC, illumination, and IG2 power supply (usually remove the deck or turn it off the fuse) with this one. No need to remove the deck to get power, or turn on the detector to search for power. An indispensable item for dressing up your electric dressing. Considering the connection of the wiring for later use, the one-touch jibbles are installed so you can easily connect the wires. Endless uses! ETC installation and radar power up... With this product, even beginners who have never played a "car fidgeting" can be easily started. Product Details: Contents: Optional coupler, fuse, 2 tie-wraps, 1 cushion tape, 1 installation manual (color printing); Our products have been changed to match the color of the wiring with the external products, so you can install them neatly when installing them. (Of course, each wire is attached to a mark tube, so the finish is very beautiful. Continuous power supply: Yellow, ACC, Red, IG2, Red, Illumination, Orange, and Couplers use the same reliable genuine product. We will give you 5 pages of items that include DIY tiger rolls, such as electrical knowledge, tool introduction, fuse needs, and various terminals.
Always install the fuse between the mounting part and the optional coupler. This may cause vehicle fire or failure. We will not bear any responsibility in the event of an accidental accident, so please take care of your own responsibility before installing this product. Also, when removing it, be sure to hold the coupler and remove it. Pulling the wire may cause the line to come out. When you first remove the coupler from the beginning, there may be some default settings depending on the included supplies. Thank you for setting it again