Feature(may vary by option.)

●1: First point in the product page 1: When charging with low battery level, the light will be very weak, and you need to charge it for 3 to 4 hours before normal use. 2: If the tail light does not light up even if you press the remote control on the first time, please charge it according to the operation method 1
●【Bike Security Alarm & Bicycle Tail Light】It is not only a bicycle alarm but also can be used as a bicycle tail light. Touch the warning for 3 seconds for the first time. Touch again within 2-12 seconds after warning will alert you for 30 seconds. If the alarm needs to be stopped, the alarm will be disconnected. As a bicycle tail light, the tail light has 3 modes. Steady on, flashing and breathing light, safe driving in the dark. (Note: After wireless remote control, you need to charge new products to activate and use. )
●【Long Battery Life & Car Search】The tail light can be used for over 90 days and can be used over 30 hours in flash mode. Remote control batteries are usually used for more than 12 months. Press the sound of the remote control to find a location where the bike is parked within 0-50m. Note: Please refer to the ninth diagram for how to replace the battery on the remote
●Intelligent Light Sensing & Smart Brake: In the flashing and breathing mode, the light senses ambient light automatically, and when the ambient light is bright, the tail light will be dark. If the surrounding light is dark, the tail light will be brighter when the surrounding light is dark. This saves power and extends usage time. When the bike slows down, the tail light is intelligently monitored, the tail light can remain on for 3 seconds, preventing rear collision, ensuring safe driving
●(115db Large Capacity & IP65 Waterproof) When the bike enters the armed state, it will sound 115db enough to drive away thieves. The tail light is wrapped with 360 degree silicone sealing ring to effectively prevent the effect of light caused by rain or other bad weather
●Quick Installation & Japanese Manual: Easy to install without any tools. Onvian products have questions about quick installation and Japanese manual. Please feel free to contact us
●Saddle Bracket Width Size Range: 50-55mm, If your bike does not fit this size, please select the seatpost mount
●Q: How to adjust the volume? A: 1: After pairing the remote control and alarm host, press the release button on the remote control will continue to hear the release sound from the host, ignore it, and release the remote control until it turns off. At this time, the host is in the configuration function. 2: Press and hold the bell button to adjust the volume from high to bass

[Black]

Description