4 x Double Sided Tape for Filmon Antenna
Uses super strong 3M double-sided tape.
Usable Temperature After Adhesion: -4°F to 330°F (-20°C to 150°C).
Tape Color: Gray (same as original)
Conforms to JIS standard 1 level
Please check the installation shape carefully before purchasing.
How to Use:
Please follow the following instructions for operation.
1. Wipe off dirt, moisture and oil from the adhesive surface and dry thoroughly.
Please use silicone off, etc.
2, Peel off one side and stick to the antenna.
The adhesive strength will decrease if reapplied, so please work with caution.
3. Peel off the other side of the release paper and stick to the glass surface.
4. Press the thumb for about 3 seconds.
5. It takes about 1 day to apply the adhesive strength of the original tape.
Please be careful not to apply excessive force.
Note:
Please check the shape of your antenna and confirm the dimensions of the image before purchasing.
Please be aware that installation instructions are not included.
Please note that there may be some scratches on the appearance of the product or minor scratches on the product and this will not affect the use of the product.
Image is for illustration purposes
The appearance of the picture and the actual item may vary without notice, but it does not affect the use of the product.
Returns and exchanges are not accepted for products that have been treated or used once removed or the film.
(Please check the product immediately after arrival.)
If you cannot install it by yourself, we recommend that you have a professional installation at a specialty store.
We cannot guarantee the product due to mistakes in installation.