Hand Hammered Tool Introduction For Hollow Rivets 0.2 inch (4 mm) ■ Hollow Rivet Hand Hammered Rod is a hand punch rod that can be finished with round crushing 0.2 inch (4 mm) aluminum hollow rivets. The hollow rivets have a flat head (rather than a clamp) and the tool has a structure close to the eyelet, so the pressure is evenly hitting the head while turning the foot back and stabilizing the finish. A handy hand hammered tool that can be used with hollow rivets with a shaft diameter of 0.2 inch (4 mm). Always use the back of a consecutive plate to work on a hard horizontal metal plate. Please be careful not to hurt your hands when using it. How to install hollow rivets 0.2 inch (4 mm) 1. Drill a positive circle hole with a diameter of 0.2 inch (4 mm) for installation 2. Pass the rivet foot (to the body of a non-umbrella) from the back. 3. Prepare a flat and hard metal base (such as the back of a continuous plate) The rivets are placed down on top of it. 4. Place the convex part of this product on the foot of the rivet, and hammer it with a mallet etc. Your feet will stay curled. Please note: Our tools are made to match the hardware we sell. This tool is also made for aluminum rivets. It may not match your hardware. Thank you for your understanding.
Please note that all tools are consumable and will not be able to return the item if purchased by mistake. The tools are also specified to match the shape of each metal and may not match the hardware you have. Thank you for your understanding