.
Product Description
The drive voltage of the relay coil is 5V and the input control level is within 5V.
1. Output driving capacity: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A
2. Easy to use, each output group has a simple 3-wire structure, and 6 output terminals are reserved.
3. The input is directly connected to the MCU IO port or digital circuit, the input high level relay device closed, free input low level relay
4. Working voltage 5V, about 70mA pull-in current per circuit, with relay status indicator light.
5.Full chip assembly Reasonable drive circuit design, using 8050 transistor to drive the electrical operation of the relay
6. It has a fixed screw hole for easy installation, the module size is 22*34*17mm.
Test Instructions
The input and output of the module are electrically insulated. After the correct voltage is supplied, simply connect the high level to the input pin (such as short circuit with VCC) to draw the relay in. If not connected or connected to a low level (GND), the relay will not work.