Feature

●Maximum Torque: 22 Nm (high speed), 80 Nm (low speed)
●Rotational Speed: 0 - 2,200 rpm (high speed), 0 - 600 rpm (low speed), Number of Blows: 0 - 3,000 rpm (high speed), 0 - 9,000 rpm (low speed)
●Drilling Capacity: 0.5 inch (13 mm) (iron), 1.5 inch (38 mm) (woodwork), 0.5 inch (13 mm) (concrete), Screw Tightening Capacity: 0.4 inch (10 mm) x 3.5 inch (90 mm) (wood screws), M6 (small screws)
●Chuck capacity: 0.06 - 0.5 inches (1.5 - 13 mm), clutch operating torque: 0.8 - 4.8 Nm, 21 levels
●Accessories: Belt hook (main unit mounted), auxiliary handle x 1, stopper x 1


Description

This 18V type rechargeable vibration driver drill combines a compact power and speed that can be used to drill mortar and blocks.

[Use]
For drilling holes in wood, metal, mortar, block, resin, etc., tightening various machine screws, wood screws, nuts, etc.

Features:
You can also drill mortar blocks when set to vibration mode.
Equipped with a spindle lock mechanism that allows the bits to be removed with one hand.
Adopts a 21-stage clutch that allows you to select the best torque.
2-speed specification that can be switched between high and low speeds depending on the work content.
Uses a keyless chuck with a lock for strong grasp.

[Precautions]
Charger, battery pack, and carrying case are sold separately.
Please use it correctly after reading the instruction manual (English language not guaranteed).
Charging time varies depending on the ambient temperature and battery pack.
The main unit may shake around while working, so please keep the unit firmly in place.
When accidentally dropped or bumped, please check the tools (bits etc.) and the main unit without breakage, crack, or deformation.
Please do not charge on paper such as cardboard or other fabric such as zabutons, tatami mats, carpets, and vinyl.
Please be sure to install tools (bits etc.) and accessories according to the instruction manual (English language not guaranteed).