Specification User Interface:
* Display resolution 320*240 pixels
* 2.8" screen diagonal
* 16 bit per RGB pixel
* Resistance Touch Control
* Jog-Switch Control
* USB Serial Port Control
* Optional TTL USART port on internal PCB (SW is not implemented yet)
* Manual and automatic input attenuation selectable in 1 dB steps between 0dB ~ 31dB
* Absolute maximum input level without +10dBm attenuation
* Absolute maximum input power with 30dB attenuation of +20dBm in short time
* 0dB Attenuation +15dBm 3-Dimensional Modulation (IIP3) Input Intercept Point
* 1dB compression point at +2dBm at 0dB attenuation
* Power Detector Resolution 0.5dB and Linear Frequency +/- 1dB
* Absolute Power Level Accuracy +/- 1dB after Power Level Calibration
* Minimum signal identifiable when using 30kHz resolution bandwidth -102dBm
* Frequency accuracy equal to selected resolution bandwidth
* Phase noise is 100kHz offset -90dB/Hz, 1MHz offset -115dB/Hz
* Spar-free dynamic range with 30kHz resolution bandwidth 70dB
* Manually select 3, 10, 30, 100, 300, 600kHz resolution filters. One of 57 resolution filters is automatically selected.
* Screen resolution is 145 or 290 measuring points.
* Scan speed over 1000 points per second when using the maximum resolution filter.
* Automatic optimization of actual scan points ensures full scan coverage regardless of resolution bandwidth you select.
Package Includes:
2.8" Spectrum Analyzer *1
7.9 inches (20 cm) Summa RG174 case x 2
USB Type-C data cable x 1
Hand rope x 1.
SMA female to female connector *1
SMA telescopic antenna x 1