Feature(may vary by option.)

●1. Use4.3-inch IPS TFT LCDscreen, with a larger view angle and can be seen clearly in strong outdoor light.
●Switch to large capacity5000mAh lithium battery, standby time is longer, and expand a USB interface.
●3. The IC is charged by high current 2A, and the charging time is shorter.
●4. Change to larger and better operating wave wheel.
●5. Switch to a power switch with a greater sense of operation and a better sense of operation.

[With Demo Kit]

[NanoVNA-F]

Description

6. Support Chinese and English menu switching;
7. Upgrade the user program by virtual U disk.
8. Standard aluminium shell to protect SMA head and reduce the interference of external electromagnetic wave to instrument.
Software open source github.com/flyoob/NanoVNA-F 8.
This is the V3.1 Version
Features:
Dimensions: 14CM * 7.5CM * 2CM (length, width and height)
Measuring Frequency: 50kHz ~ 1000MHz
RF output: - 13 DBM (maximum - 9 dbm)
<; 0.5 ppm
<; 1.1
Display: 4.3 inch IPS TFT (800x480)
USB Interface: USB Type-C Communication Mode: CDC (Serial)
Power consumption: USB 5V 200mA, built-in 5000mAh battery, theoretical life of 18 hours, maximum charging current 2A
Output capability: 5V/1A
Number of calibration points: 101
Number of scanning points: 101
Display Tracking: 4, Mark: 4, Settings Save: 5
Scanning time: about 1.9s/time (50kHz-1000MHz full frequency band)
Measurable S parameters, voltage standing wave ratio SWR, phase diagram, group delay, Smith circle diagram... ;