Specifications:
Dimension: 14cm * 7.5cm * 2cm(Length,Width,Height)
Measuring frequency: 50kHz - 1000MHz
RF Output: -13 DBM (max. -9 dBm)
<;0.5 ppm
<;1.1
Display: 4.3" IPS TFT (800x480)
USB Interface: USB Type C Communication Mode: CDC (serial)
Power consumption: USB 5V 200MA, built-in 5000mAh battery, 18 hours theoretical life, maximum charging current 2a
Output function: 5V/1A, support Android and Apple phone
Number of calibration points: 101
Number of Scan Points: 101
Display Tracking: 4, Mark: 4, Settings: 5.
Scan Time: Approx. 1.9 seconds per hour (50 kHz-1000 MHz full frequency band).
Measurable S parameters, voltage standing wave ratio SWR, phase diagram, group delay, Smith circle diagram...
19.0 Wh (approx. 5,000 mAh after conversion) High Capacity Lithium Battery
Designed with a metal shield for RF front end, the S21 can have a dynamic range better than 60dB in full frequency range.
Nan ovna-f s11 parameter, SWR 3D wave ratio test
UV9d Antenna U-band 3D Wave Ratio Measurement, Start Frequency: 300m, End Frequency: 600m, Minimum Frequency of 3D Wave 441.0000MHz, SWR = 1.03
S21 Injection Loss Measurement, Low Pass, High Pass, Band Pass Filter Measurement
Package List:
4.3" vna vector network antenna analyzer