Feature(may vary by option.)
●PC control software can export Touchstone (SNP) files that can be used for various radio design and simulation software
●The improved frequency algorithm can support measuring frequencies up to 900MHz using the SI5351 odd harmonic extension
●Metal shielding is designed to reduce external interference and improve measurement accuracy
●The 50K-300MHz frequency range of SI5351 direct output provides better dynamic than 70dB
●The extended 300m-600mHz band provides dynamics exceeding 50dB, and the 600m to 900m band is better than 40dB dynamics
●Small, portable and easy to use, this project aims to provide an RF gadget but useful instrument for enthusiasts
[50KHz-900MHz]
[50kHz-3GHz]
Description
Specifications:
Material: PCB
Color: Black
Measuring frequency: 50kHz - 300MHz (50kHz - 900MHz, enabling extended firmware (product will be updated with the latest firmware before shipping). Actual measurement frequency is 50kHz to 900MHz)
RF Output: -13 dbm (max. -9 dbm)
<;0.5ppm
Measurement range: 70DB (50kHZ-300MHz), (50DB (300m-600mHz), 40DB (600m-900mHz) Enable extended firmware)
<;1.1
Display: 2.8" TFT (320*240)
USB interface: USB type c
Communication mode: CDC (serial)
Power: USB 5V 120MA, Maximum charging current 0.8a
Battery: 1 x Lithium battery, 600mAh (included)
Number of calibration points: 101 (fixed)
Number of scanning points: 101 (fixed)
Tracking Display: 4, Markings: 4, Settings: 5.
PCB Size: 3.4 x 2.1 x 0.4 inches (85.5 x 54 x 11 mm) (without connectors and switches)
Package Size: 4.7 x 3.1 x 1.6 inches (120 x 78 x 40 mm).
Package weight: 5.6oz (160g)
Package List:
1 x Host
1 x USB Type-C data cable.
2 * 30mm SMA male to male cable
1 x SMA female to female connector.
Specifications:
Material: Aluminum alloy (case)
Main Color: Black.
Battery: 1 x Lithium battery, 5,000 mAh.
Frequency: 50kHz-3GHz
RF Output Power: -9DBM (Errors within 1GHz: ±1dB)
<;0.5ppm
S21 dynamic range: 70DB (1.5gHz), 60DB (3gHz).
S11 Dynamic Range: 50DB (1.5gHz), 40DB (3gHz).
2 Port Return Loss: 20dB (1.5GHz), 13dB (3GHz)
Number of calibration points: 101 pt.
Number of scanning points: 101 pt.
Tracing: 4
Number of mark points: 4 (mark point bar can be moved up and down on the screen)
USB Interface: USB Type C Communication Mode: CDC (serial)
Storage: 5 groups (after storage, can be recall directly when used again, no need to re-adjust, last parameters can not be saved and shut down automatically recall when turned on again)
The result interpretation of the support calibration can be measured after adjusting the measurement frequency band and then without re-adjusting.
Scan Time: Approx. 1.9 S/1 hour (50 kHz-3000 MHz full frequency band).
Item Size: 5.5 x 2.9 x 0.8 inches (140 x 73 x 20 mm).
Item Weight: 9.5oz (270g)
Package Size: 9.8 x 5.9 x 2.0 inches (250 x 150 x 50 mm).
Package Weight: 507g / 1.1lb
Package Contents:
1 x Host
1 * Open SMA calibration kit
1 x SMA short circuit calibration kit.
1 * Load SMA 50 calibration kit
1 x SMA-KK Double Head Female Hole Adapter
1 x SMA-JJ Double Head Male Pin Adapter
1 * SMA-JKW inner screw hole to inner screw adapter
2 * 200mm SMA-JJ RG405 RF Cable
1 x USB Type-C data cable.