Feature

●Frequency Meter Function: The network analyzer has a frequency meter function, which can effectively measure cable length and group time delay. Most importantly, you can debug the UV band frequency duplexer. Effective shielding electromagnetic interference to ensure measurement accuracy
●Testing Range: Vector network analyzers are based on OwOComms S A 2 design to test the antennas constant wave and impedance, insertion loss, filter isolation and constant waves, cable attenuation, shortening rate and phase and antenna amplification. Amplifier
●4.3" IPS LCD Touchscreen: The NanoVNA F V2 vector network analyzer adopts a 4.3" IPS LCD display with an ultra-wide viewing angle, no harm to your eyes even after long time use. Full touch screen design, three side buttons at the same time, flexible and convenient operation
●50KHZ‑3000MHZ: The network analyzer is expanded to 50KHz‑3000MHz, which increases the dynamic range up to 80db. Can be used to debug the duplex more accurately. It can measure S parameters, voltage constant wave ratio SWR, phase, group delay, smith charts and more
●METAL SHIELD: Touch screen antenna analyzer is robust and durable. The RF front end is designed with metal shielding and the S21 dynamic range is over 80dB in full frequency range. The RF interface is SMA and is convenient for connecting various test components


Description

11
11

11

11

11

4.3" IPS Touch Screen

The measurement range of the 3G NanoVNA-F V2 is expanded to 50k-3GHz, the dynamic range is improved and reach 80db.4.3 inch IPS LCD display, resolution 800*480, super wide viewing angle, long term usage, full touch screen design, 3 side buttons at the same time, flexible and convenient operation.

USB-C Rechargeable & PC Connectivity

Built-in 5000mAh lithium battery, standby time up to 7 hours, use high current 2A charging IC to reduce charging time, extended 5V/1A USB output interface.It can be used as a mobile power pack to charge your phone when not in use.Compatible with most Android phones.Support Windows and LINUX computer control.

MF/HF/VHF/UHF

It is very useful as an antenna analyzer for your ham station.Can, more accurate, and simple.Which can be used for debugging which can measure S parameters, voltage fixed waveratio SWR, phase map, group delay, smith chart and more.Ideal for all Ham radio users

11

Specifications

Item Type Vector Network Analyzer
Model NanoVNA F V2
Screen 4.3" IPS TFT 800x480
Measuring frequency range 50KHz - 3000MHz
RF output -9dbm (Error within 1GHz: Positive or minus 1db)
Frequency Accuracy < 0.5ppm
S21 Dynamic Range 70dB(1.5GHz), 60dB(3GHz)
S11 Dynamic Range 50dB(1.5GHz), 40dB(3GHz)
2 Port Return Loss 20dB Type (1.5GHz), 13dB Min(3GHz)
USB interface USB Type C
Number of calibration points 101 pcs
Number of Scan Points 101 pcs
Display Tracking 4 traces
Scan Time Approximately 1.9 seconds per time (50 kHz-3000 MHz full frequency band)
Battery Type 5000mAh Li-ion battery (built-in)
Communication mode. CDC (serial)