Feature

●Testing Range: Vector network analyzers are based on OwOComms S A 2 design to test the antennas constant wave and impedance, insertion loss, filter isolation and constant waves, cable attenuation, shortening rate and phase and antenna amplification. Frequency Meter Function: The network analyzer has a frequency meter function, which can measure cable length, strong group time delay. Most importantly, you can debug the UV band frequency duplexer. Effectively shields electromagnetic interference, ensuring the measurement accuracy
●5000mAh Lithium Ion Battery: The antenna analyzer has a built-in 5000mAh lithium ion battery, which can stand by up to 7 hours. Adopts high current 2A charging IC to reduce charging time and extend the 5V 1A USB output interface. Support Chinese and English interface, adjust the brightness of the screen and support the top computer
●METAL SHIELD: Touch screen antenna analyzer is robust and durable. The RF front end is designed with metal shielding and the S21 dynamic range is over 80dB in full frequency range. The RF interface is SMA and is convenient for connecting various test components
●4.3" IPS LCD Touchscreen: The NanoVNA F V2 vector network analyzer adopts a 4.3" IPS LCD display with an ultra-wide viewing angle, no harm to your eyes even after long time use. Full touch screen design, three side buttons at the same time, flexible and convenient operation
●50KHZ‑3000MHZ: The network analyzer is expanded to 50KHz‑3000MHz, which increases the dynamic range up to 80db. Can be used to debug the duplex more accurately. It can measure S parameters, voltage constant waveratio SWR, phase, group delay, smith chart, etc


Description

Specifications:
Item Type: Vector Network Analyzer
Model: NanoVNA F V2
Material: Aluminum Alloy, LCD
Screen: 4.3" IPS TFT 800x480
Measuring frequency range: 50KHz-3000MHz
RF output power: -9dbm (error within 1GHz: positive or negative 1db)
Frequency accuracy: <0.5ppm
S21 Dynamic Range: 70dB(1.5GHz), 60dB)3GHz)
S11 Dynamic Range: 50dB) 1.5GHz, 40dB) 3GHz.
2 port return loss: 20dB standard) 1.5GHz, 13dB minimum: 3GHz)
USB Interface: USB Type C Communication Mode: CDC) Serial)
Number of calibration points: 101 pt.
Number of scanning points: 101 pt.
Display Tracking: 4 traces
Scan time: about 1.9 seconds per 3 minute hour (full frequency bandwidth of 50kHz to 3000MHz).
Battery Type: 5000mAh Li-ion battery (built-in)
Packing List:
1 x Vector Network Analyzer
2 x SMA JJ RG405 Connecting Cable
6 x SMA Adapters
1 x Stylus
1 x Type C Cable
1 x English instruction manual
Storage box