Feature(may vary by option.)
●4.3" IPS LCD display, resolution 800*480, super wide viewing angle, long-term use will not hurt your eyes
●Sturdy and durable all aluminum alloy case can effectively protect the electromagnetic interference to ensure the measurement accuracy
●The radio frequency interface is SMA, which is convenient for connecting various tested parts
●Full touch screen design, three side buttons at the same time, flexible and convenient operation
●Support Chinese and English interface
●Optimized UI design for convenient users to perform measurement operations
●Support to adjust screen brightness
●Firmware can be upgraded via virtual U disk. No programmer needed
[VNA F V2]
[VNA V2]
Description
Features:
d and firmware can be upgraded to USB Type-C data cable.
Standard fine quality calibration parts and RG405 phase stabilization cable ensure accuracy of calibration.
Designed with USB 5V/1A power output interface.
Using 2A high current charging IC will shorten the charging time.
The host computer supports host computer software, supports Chinese and English interface.
The screen image of the device can be obtained by obtaining a screenshot of the host computer.
Function: Can measure S parameters, voltage standing ratio, mischart, phase, group delay, etc.
Specifications:
Material: Aluminum alloy (case)
Main Color: Black.
Battery: 1 x Lithium battery, 5,000 mAh.
Frequency: 50kHz-3GHz
RF Output Power: -9DBM (Errors within 1GHz: ±1dB)
<;0.5ppm
S21 dynamic range: 70DB (1.5gHz), 60DB (3gHz).
S11 Dynamic Range: 50DB (1.5gHz), 40DB (3gHz).
2 Port Return Loss: 20dB (1.5GHz), 13dB (3GHz)
Number of calibration points: 101 pt.
Number of scanning points: 101 pt.
Tracing: 4
Number of mark points: 4 (mark point bar can be moved up and down on the screen)
USB Interface: USB Type C Communication Mode: CDC (serial)
Storage: 5 groups (after storage, can be recall directly when used again, no need to re-adjust, last parameters can not be saved and shut down automatically recall when turned on again)
Support calibration results interpretation can be measured after adjusting the measurement frequency band and then without re-adjusting
Scan Time: Approx. 1.9 S/1 hour (50 kHz-3000 MHz full frequency band).
Item Size: 5.5 x 2.9 x 0.8 inches (140 x 73 x 20 mm).
Item Weight: 9.5oz (270g)
Package Size: 9.8 x 5.9 x 2.0 inches (250 x 150 x 50 mm).
Package Weight: 500g / 1.1lb
Package Contents:
1 x Host
1 * Open SMA calibration kit
1 x SMA short circuit calibration kit.
1 * Load SMA 50 calibration kit
1 x SMA-KK Double Head Female Hole Adapter
1 x SMA-JJ Double Head Male Pin Adapter
1 * SMA-JKW inner screw to inside hole inside of inner screw to outside of elbow
2 * 200mm SMA-JJ RG405 RF Cable
1 x USB Type-C data cable.
1 x Stylus