Feature

●Note: Raspberry Pi board is not included
●Based on Raspberry Pi 40PIN GPIO interface design, suitable for Raspberry Pi motherboard and Jetson Nano More instructions are in the English manual: www.waveshare.com/wiki/Servo_Driver_HAT
●This servo driver board is a servo expansion board for Raspberry Pi. Using PCA9685 chip, expands up to 16 channels and supports 12-bit resolution per channel
●Uses I2C interface. This board also has a built-in 5V regulator that allows up to 3A output current and can be powered from the battery through the VIN terminal. Can be used in robot applications
●There are many electronic components suitable for Raspberry Pi in our Amazon store. If you are interested in Raspberry Pi, please visit my Amazon Store


Description

Overview:
Not to mention, the Raspberry Pi is powerful in most cases, but it is not so good to provide precise PWM output. You may have tried to use the Raspberry Pi to control the robot arm or hexapod walker, but eventually frustrated due to limited number of PWM output and jitter servo. Now you have this handy servo driver board.


Features:
1. Raspberry Pi connectivity, compatible with Raspberry Pi Zero/ Zero W/ Zero WH/ 2B/ 3B/ 3B+
2. I2C control, only use 2 pin
3. Up to 16 channels servo/PWM output, 12-bit resolution of each channel (scale of 4096)
4. Integrates the 5V regulator with up to 3A output current, and can be powered via the VIN terminal from battery 5
5. Support standard servo interface, SG90, MG90S, MG996R and other common servos
6.Reserved I2C control pin Works with other control boards

Specifications:
Power Supply: 5 V (Pi connector) or 6 V - 12 V (VIN terminal)
Servo Voltage: 5V
Logic Voltage: 3.3V
Driver: PCA9685
Control Interface: I2C
Dimensions: 65mm x 30mm
Mounting Hole Size: 0.1 inches (3.0 mm)

Package Includes:
1 x Servo Motor Expansion Board
2 x Screw Pack